North American Technician Excellence, Inc. (NATE)

For years, the HVAC industry has struggled to combine a variety of technical skills and knowledge into a standard testing program that represents the entire industry. NATE changes all that. As an independent, non-profit coalition of industry leaders, NATE - North American Technician Excellence - provides comprehensive, nationwide testing and certification for HVAC technicians.

As a result, many groups benefit. Consumers' opinions of the HVAC industry are raised. The supply of qualified technicians grows. And technicians themselves have a reason to reach higher and take even more pride in the job they do. Everyone with a stake in the industry reaps the rewards.

Other Courses in this CEU:

• AIR 5 - Duct Leakage & Duct Sealing
• AIR 7 - Practical Duct Modifications
• AIR 8 - Demystifying the Airs Combustion, Ventilation, & Make-up
• AIR 9 - Mechanical Ventilation for Existing Homes: What Works?
• BAS 1 - Combustion Safety
• BAS 1 - The House as a System
• BAS 3 - House as a System
• BAS 4 - The House as a System (Repeat)
• BAS 5 - Not Just Hot Air: Heating Systems Basics
• COMF 3 - Ducts: What Matters?
• COMF 6 - Radiant Heat Transfer
• COMF 7 - Radiant Heating & Cooling 101
• DIAG 1 - Panel: Worst Case Depressurization (Advanced)
• DIAG 5 - Combustion Analysis: Proper Use of Your Test Equipment
• DIAG 6 - Diagnosing High Efficiency Gas Heating Systems
• DIAG 6 - Worst-Case Draft: What Do the Numbers Mean?
• DRY 2 - Mechanical Ventilation: Challenges for Existing Homes (Advanced)
• DRY 5 - Mechanical Ventilation Installation: Details that Make the Difference
• DUR 3 - Combustion Saftey: Do No Harm
• FUND 1 - Introduction to the House as a System
• FUND 1 - Combustion System Efficiency
• FUND 1 - Heating System Basics
• FUND 4 - Ducts: What Matters?
• FUND 5 - Combustion Safety
• FUND 6 - Venting Combustion Appliances
• FUND 6 - Intro to HVAC Systems: Efficiency & Performance
• H&C 3 - Central AC Installation: Best Practices
• H&C 5 - How to Get the Heat Out of a Heat Pump
• H&C 7 - Applying NFPA 54 to Combustion Air
• H&C 8 - Practical Duct Modifications
• HEAL 4 - Wholistic Approaches to CO
• HEAT 4 - Recognizing & Ensuring Reliable Venting Performance
• HVAC 1 - Hydronics: Basics & Operation
• HVAC 1 - Duct Sealing: What Matters? What Works?
• HVAC 2 - Sizing Heating & Cooling Systems
• HVAC 2 - Ducts: Challenges, Diagnostics, & Solutions
• HVAC 2 - Category 1 Venting (Part 1)
• HVAC 3 - HVAC System Troubleshooting & Diagnostics
• HVAC 3 - Category 1 Venting (Part 2)
• HVAC 4 - HVAC System Installation & Best Practices in New Construction
• HVAC 4 - Sizing Heating Systems
• HVAC 5 - EPA ACCA QI Specifications: Feedback from the Frontlines
• HVAC 5 - Ducts: Installation & Design
• HVAC 5 - Central Air Conditioning: Principles & Performance
• HVAC 6 - New Technologies in Energy Efficiency (HVAC focus)
• HVAC 6 - Understanding 80+ & 90+ % Efficient Gas Furnaces
• HVAC 8 - HVAC: New & Emerging Technology
• HVAC 9 - New Technology for Oil Systems
• LEAR 5 - Worst Case Depressurization
• LOOK 5 - Combustion Safety Testing
• MAM 13 - House Depressurization & Resilient Combustion Venting: Challenges & Solutions (Advanced)
• MAM 15 - Sealing Ducts (Hands-on)
• MAM 18 - Designing & Installing Mechanical Ventilation Systems
• MFD 02N - Combustion Safety with Gas Appliances (HVAC Lab) [CANCELED]
• MPM 09 - Finding & Fixing Carbon Monoxide Problems
• MT 01N - Train the Trainer: Servicing Oil Furnaces (In-field/INCAA)
• MT 01N - Train the Trainer: Servicing Oil Furnaces (In-field/INCAA)
• NEW 2 - On the Cutting Edge with Heat Pumps & Controls
• NEW 3 - New Gas Products for Heat & Hot Water
• NEW 6 - Heat Pump & AC Installation & Performance: What Matters?
• SAFE 1 - Venting Combustion Systems: Troubleshooting & Sizing
• SOLV 4 - The Low Load Challenge: HVAC Systems for High Performance Homes & Apartments
• SOLV 5 - Duct Leakage & Duct Sealing
• SOLV 6 - Solving Pressure Problems: Making Sure the Chimney Wins
• TAM 16N - Mechanical Ventilation Systems: Verifying Performance (In-field)
• TAM A - The House as a System
• TEV C - The House as a System (Repeat)
• THAM 3 - Mechanical Ventilation: Performance Diagnostics (in field)
• ThPM 05 - Radiant Heating & Cooling: Design & Components
• ThPM 09N - Getting the Most from Your Duct Blaster (In-field)
• THPM 1 - Measuring & Predicting Worst-Case Depressurization (REPEAT) (In field)
• ThPM 16 - Designing & Sizing Duct Systems
• THPM 3 - Quantifying Duct Leakage (In field)
• THPM 5 - Finding & Fixing CO in Gas Furnaces (REPEAT) (In field)
• TPM 15 - Measuring Airflow in Ducts (Hands-on)
• TPM 19 - Mechanical Ventilation System Design
• TPM C - Doing Ducts Right
• TPM E - Central Air & Heat Pumps: How Installation Affects Performance
• W-1 HVAC - Practical Duct Modifications
• W-2 HVAC - Central Air Conditioning: Design, Testing, & Installation
• W-2 LIAB - Measuring & Predicting Worst Case Depressurization
• W-3 HVAC - Duct Design & Sizing
• WAM 5 - Finding & Fixing CO in Gas Furnaces (In field)
• WAM A - Sizing Heating and Cooling Systems
• WAM E - Doing Ducts Right (REPEAT)
• WPM 1 - Duct Triage: Best Practices for Existing Homes (In field)
• WPM 4 - Measuring & Predicting Worst-Case Depressurization (In field)
• WPM A - More on 10 Ways to Undermine Comfort & Customer Satisfaction
• WPM B - The New ASHRAE 62.2 Ventilation Standard: How it Affects You