Building Performance Institute, Inc. (BPI)

BPI is located in upstate New York, and has been providing certifications to building trade workers since 1998. The BPI staff and Affiliate network provide an infrastructure for delivery of certification services nationwide. BPI certifications go beyond those typically provided by individual trades by utilizing the “house as a system” concept as the foundation for each job designation.

Building performance contractors utilize a systematic approach to home-improvement which addresses all aspects of the building system with respect to health and safety, building durability, and energy efficiency. BPI certified contractors are tested on their building science knowledge skills as well as their ability to apply BPI's standards and perform the inspections necessary to properly diagnose building performance.

Other Courses in this CEU:

• Recognizing Thermal Patterns with IR
• ACCA's HVAC Quality Installation and Specifications
• Panel: Running Your Business Better
• Home Performance Sales & Marketing
• When Building Science & Codes Conflict
• Integrating Renewables with Home Performance
• W-3 OPP - What Saves Energy: How Much? What Matters?
• AIR 1 - Selecting Registers for Comfort
• AIR 2 - AC & Heat Pump Performance
• AIR 3 - Designing an Effective Ventilation System
• AIR 4 - Correcting Low Airflow
• AIR 5 - Duct Leakage & Duct Sealing
• AIR 6 - Field Results on Delta-Q for Quantifying Duct Leakage
• AIR 7 - Practical Duct Modifications
• AIR 8 - Demystifying the Airs Combustion, Ventilation, & Make-up
• AIR 9 - Mechanical Ventilation for Existing Homes: What Works?
• AVE 3 - Insulating Existing Homes: Treating Them from the Outside
• AVE 5 - Passive House Design
• BAS 1 - Combustion Safety
• BAS 1 - The House as a System
• BAS 2 - Heat Loss & Heat Gain
• BAS 2 - Intro to Diagnostics: Whazzit Mean?
• BAS 3 - Electrical Utility Consumption Analysis: Adding It All Up
• BAS 3 - House as a System
• BAS 4 - The House as a System (Repeat)
• BAS 4 - Moisture Physics 101
• BAS 5 - Not Just Hot Air: Heating Systems Basics
• BAS 5 - Intro to Mechanical Ventilation
• BAS 6 - Where's the Q in Indoor Air Quality?
• BAS 7 - Energy Opportunities & Priorities
• BAS 8 - Intro to Air Pressure
• BLD 4 - Cathedral/Conditioned Attics
• BLD 5 - Windows: Sorting Through the Options for New Homes
• BLD 6 - Durable Wall Systems
• BLD 7 - Systems Approach to High Performance Homes (& Tax Credits)
• BLD 8 - Addressing Thermal Bypasses in New Construction
• BUS 1 - Marketing Home Performance Services
• BUS 1 - Close the Deal with Streamlined Diagnostics
• BUS 1 - Conveying the Value of ENERGY STAR® to Your Customers
• BUS 1 - Marketing Strategies & Techniques for the HP Contractor
• BUS 1 - Home Performance Analyst: The New BPI & RESNET Standard Update
• BUS 2 - Communication: Client Education & Customer Service
• BUS 2 - Selling Reduced Risk
• BUS 2 - Business Management Systems for Whole House Contractors (Part 1)
• BUS 2 - NJ Home Performance with ENERGY STAR®: Be part of it's success and profit
• BUS 2 - Home Performance Sales on Steroids
• BUS 3 - Home Performance Sales Techniques: How to Win the Job
• BUS 3 - Pricing Whole House Services
• BUS 3 - Business Management Systems for House House Contractors (Part 2)
• BUS 3 - Meeting the Requirements of the EPA ENERGY STAR® Homes Thermal Bypass Checklist
• BUS 4 - What is the Home Performance Contracting Opportunity?
• BUS 4 - Selling Whole House Services: Contractor & Consultant Perspectives
• BUS 4 - Business Management Systems for Building Performance Contractors (Part 1)
• BUS 4 - Selling Home Services Performance Boot Camp (Part 1)
• BUS 5 - How Not to Get Sued
• BUS 5 - Selling Home Performance Services Boot Camp (Part 2)
• BUS 5 - Predicting Energy Savings to Get Sponsor Support
• BUS 5 - Home Performance Contractor Success Stories
• BUS 5 - Business Management Systems for Building Performance Contractors (Part 2)
• BUS 6 - Beyond the Box: Increasing Profit & Satisfaction per Customer
• BUS 7 - Financing Opportunities for Home Performance Contractors
• BUS 7 - Making Sure of Job Quality
• BUS 8 - Growing Your Business into Home Performance
• BUS 8 - Improve Predicted Energy Savings with Utility Bill Analysis
• BYND 1 - DHW: Tank versus Tankless
• BYND 2 - Surprising Electric Baseload Uses
• BYND 3 - Lighting Measures: Delivering on Predicted Savings & Benefits
• CARB 1 - Climate Change & the Residential Sector: Concepts & Terms
• CARB 2 - Residential Efficiency Programs: Lessons Learned
• CARB 3 - Policy Helps & Hindrances for Residential Climate Initiatives
• COMF 1 - Working with Technicians to Correct Low Air Flow
• COMF 1 - Principles of Thermal Comfort
• COMF 2 - Ductless (Mini-Split) Heat Pumps: Everywhere But Here
• COMF 2 - Selecting Registers for Comfort
• COMF 3 - Local Space Heating & Cooling: Ductless & Pipeless
• COMF 3 - Ducts: What Matters?
• COMF 4 - Cool Roofs for a Warming Planet
• COMF 4 - Choosing Mechanical Systems
• COMF 5 - Mechanical Solutions for Humidity Control
• COMF 5 - Space Heaters & Fireplaces
• COMF 6 - Efficient Space & Water Heating: Fact & Fiction
• COMF 6 - Radiant Heat Transfer
• COMF 7 - Duct Design Strategies
• COMF 7 - Radiant Heating & Cooling 101
• COMF 8 - Selecting Registers for Air Flow & Comfort
• COMF 8 - It's Not the Heat, It's the Humidity
• CONS 1 - Innovative Approaches to Energy Education
• CONS 1 - How Markets Differ: Tools to Understand & Influence Your Market
• CONS 2 - Consumer Action: Connecting, Choosing, & Changing
• CONS 3 - Marketing for Weatherization and HVAC Contractors
• CONS 4 - Consumer Feedback Devices
• CONS 5 - Managing Customer Expectations
• DIAG 1 - Panel: Worst Case Depressurization (Advanced)
• DIAG 2 - Care & Feeding of Your Diagnostic Equipment
• DIAG 3 - Zonal Pressure Diagnostics: When Needed & Lessons Learned
• DIAG 4 - Moisture Measurement
• DIAG 4 - Using the Duct Blaster
• DIAG 4 - House Interactions: Unintended Consequences with Combustion Equipment
• DIAG 5 - Advanced Blower Door Diagnostics
• DIAG 5 - Using & Interpreting Infrared
• DIAG 5 - Combustion Analysis: Proper Use of Your Test Equipment
• DIAG 6 - Diagnosing High Efficiency Gas Heating Systems
• DIAG 6 - Worst-Case Draft: What Do the Numbers Mean?
• DIAG 7 - Zonal Pressure Diagnostics
• DIAG 7 - Using & Interpreting IR
• DIAG 8 - Using and Interpreting Infrared
• DIAG 8 - Monitoring Tools for In-House Feedback & Verification
• DONE 1 - Lighting: Products & Practices for Big Savings
• DONE 2 - Cost Effective & Practical: Implementing High Performance, Green New Homes
• DONE 3 - Monitoring Tools for In-House Feedback & Verification
• DONE 4 - Best Practices for ENERGY STAR® Lighting in New Construction
• DONE 4 - So You Think You Are Densepacking?
• DONE 6 - Implementation Challenges: Specs that Work
• DONE 7 - Attached Housing Technical Issues
• DONE 8 - Productivity: Maintaining Tools & Equipment
• DRY 2 - Mechanical Ventilation: Challenges for Existing Homes (Advanced)
• DRY 3 - Dense Pack Insulation: Doing It Right!
• DRY 5 - Mechanical Ventilation Installation: Details that Make the Difference
• DRY 6 - Insulating Existing Basements (Advanced)
• DRY 7 - Crawl Space Solutions: Measured Results
• DRY 8 - When Does a Moisture Problem Become a Mold Problem?
• DUR 1 - Moisture & Mold: Causes, Solutions, & Prevention (PART 1)
• DUR 1 - Fixing Wet Crawl Spaces
• DUR 2 - Moisture & Mold: Causes, Solutions, & Prevention (PART 2)
• DUR 2 - Moisture Management for New Construction
• DUR 3 - Integrating IAQ & Energy Efficiency in Multis
• DUR 3 - Combustion Saftey: Do No Harm
• DUR 4 - Mold & Housing: Facts versus Fiction
• DUR 4 - The Garage Conneciton Not the Twilight Zone
• DUR 5 - Moisture Management in New Homes
• DUR 6 - Mechanical Ventilation & IAQ
• DUR 6 - Mechanical Ventilation Systems: Effectiveness & Operating Costs
• EFF 4 - Attic Prep & Bypass Sealing
• EFF 5 - Insulating & Air Sealing Brick Walls: New & Old
• EFF 6 - Sound Advice for Quiet Homes
• EFF 7 - Crawl Space Techniques
• EFF 8 - Preventing & Solving Wet Attics & Ice Dams
• ELEC 4 - Micro-Cogeneration: Is There a Kilowatt in Your Future?
• ELEC 5 - Lighting: CFLs & Beyond
• ELEC 6 - Reducing Cooling Loads
• ELEC 7 - Humidity Control: Reducing the Loads
• ELEC 8 - Using Smart Technology to Implement Demand Side Management
• ENCL 4 - Sidewall Insulation Tips & Techniques
• ENCL 5 - Beyond R-Value
• ENCL 6 - Superinsulation Details: Retrofits & New Homes
• ENCL 7 - The Many Faces of Spray Foam
• ENCL 8 - Sealing Key Junctures
• FEED 4 - Home Feedback Systems: What's Going on Here?
• FEED 5 - Energy Audit & Rating Tools
• FEED 6 - Get In, Get Out, Get Diagnostics Right
• FEED 7 - Thinking Thermally: Infrared Thermography for Building Diagnostics
• FEED 8 - Moisture Diagnostics
• FHP - Profit with Home Performance
• FIX 1 - Get Down with Basement Conversions
• FIX 2 - So You Think You're Dense Packing?
• FIX 3 - Findiing & Fixing Key Junctions: Existing Homes
• FPM 01N - Water Heaters: Forensic Exploration (In-field/INCAA)
• FPM 04N - Air Sealing High Rise MFB (In-field)
• FPM 09 - Indoor Air Quality
• FUND 1 - Heating System Basics
• FUND 1 - Combustion System Efficiency
• FUND 1 - Introduction to the House as a System
• FUND 1 - Heat, Air, & Moisture Flow: House as a System
• FUND 1 - House as a System
• FUND 2 - Moisture Sources & Transport
• FUND 2 - Moisture Sources & Transport
• FUND 2 - Insulation & Air Sealing: Principles, Priorities, & Performance
• FUND 2 - Building Energy Use Fundamentals
• FUND 2 - Zonal Pressure Diagnostics: When, Where, & How
• FUND 3 - Dealing with the Job Stoppers
• FUND 3 - Moisture Impacts, Sources & Remedies
• FUND 3 - Cost Effectiveness & Energy Efficiency for Non Nerds
• FUND 3 - Fundamentals of Electric & Gas Baseload
• FUND 3 - Prioritizing Energy Savings: What's Important?
• FUND 4 - Defining Thermal & Pressure Boundaries
• FUND 4 - Combustion Safety Testing
• FUND 4 - Ducts: What Matters?
• FUND 4 - Hydronics 101: Best Practices and Opportunities for Improvements
• FUND 4 - The Impact of Moisture on Buildings
• FUND 5 - Combustion Safety Testing
• FUND 5 - Venting Combustion Appliances: Recognizing & Ensuring Reliable Performance
• FUND 5 - The House as a System
• FUND 5 - Combustion Safety
• FUND 5 - Understanding Building Pressures
• FUND 6 - The Basic Ingredients of Good Indoor Air Quality
• FUND 6 - Intro to HVAC Systems: Efficiency & Performance
• FUND 6 - Venting Combustion Appliances
• FUND 7 - Mechanical Ventilation: Sorting Out the Options
• FUND 7 - Heat Loss & Heat Gain
• FUND 8 - Mechanical Ventilation
• FUND 8 - Heating & Cooling: Sorting Out the Options
• GAS 1 - Reducing Greenhouse Gases in Middle Class Homes
• GAS 2 - Climate Change Basics
• GRN 1 - Uniquely Affordable: Affordable Housing Opportunities & Challenges
• GRN 1 - Solar Applications for the Pacific Northwest
• GRN 2 - Integrating Green & Energy Efficiency into Remodeling: Lessons Learned
• GRN 2 - Understanding the Green Programs
• GRN 3 - Thinking Small: Understanding Zero-Energy Homes
• GRN 4 - Grow Your Own Water
• GRN 4 - Tying Energy Efficiency into Housing Design
• GRN 4 - Understanding the IECC & Code Changes in NJ & PA
• GRN 5 - Greener Homes: Achieving Health, Safety, & Durability
• GRN 5 - Residential Green: Local Case Studies
• GRN 6 - Residential Photovoltaics: Installation Methods in New & Existing Homes
• GRN 6 - Green Energy Incentives & Synergies with Home Performance
• GRN 7 - "Building" Deconstruction
• H&C 3 - Central AC Installation: Best Practices
• H&C 4 - House Depressurization & Combustion Safety
• H&C 7 - Applying NFPA 54 to Combustion Air
• H&C 8 - Practical Duct Modifications
• HEAL 1 - Green Is Hot, But Is It Healthier?
• HEAL 2 - Wet Basements & Radon: Common Solutions
• HEAL 3 - EPA’s New Lead Rule
• HEAL 4 - Wholistic Approaches to CO
• HEAL 5 - Lead Based Paint Issues
• HEAL 7 - Identifying & Dealing with Asthma Triggers
• HEAL 7 - Mold Assessment & Clean-Up Essentials
• HEAL 8 - Reducing Particulates in the Home
• HEAL 8 - Can You Name Six Harmful Soil Gases?
• HEAT 4 - Recognizing & Ensuring Reliable Venting Performance
• HEAT 5 - Sizing HVAC Equipment: Different Approaches
• HEAT 6 - Advanced Heating: Gas & Oil
• HEAT 7 - Geothermal & Other High Performance Heat Pumps: Field Results
• HEAT 8 - DeltaQ Update: Using Blower Doors for Duct Leakage Testing
• HOR 5 - European Zero Energy Retrofits
• HORZ 3 - Details of Superinsulation Retrofits
• HORZ 4 - Energy Use: How Low Can You Go?
• HORZ 5 - Home Performance Analyst: Update on BPI/RESNET Joint Certification
• HOT 1 - Reducing Cooling Loads
• HOT 2 - Cooling the Frostbelt: Central AC in the North
• HOT 3 - Room & Central AC Triage (without an AC license)
• HP 1 - Home Performance Marketing That Works for Contractors & Programs
• HP 2 - Successful Home Performance Programs: Contractors' Perspectives
• HP 3 - Funding Home Performance Programs
• HVAC 1 - Hydronics: Basics & Operation
• HVAC 1 - Energy Efficiency, Appliances, & Baseload
• HVAC 1 - Radiant Heating & Cooling
• HVAC 1 - Duct Sealing: What Matters? What Works?
• HVAC 2 - Sizing Heating & Cooling Systems
• HVAC 2 - Latest & Greatest in Heating & Cooling
• HVAC 2 - Category 1 Venting (Part 1)
• HVAC 2 - Ducts: Challenges, Diagnostics, & Solutions
• HVAC 3 - Category 1 Venting (Part 2)
• HVAC 3 - Beyond Oil Heating: Alternatives & New Technologies
• HVAC 3 - HVAC System Troubleshooting & Diagnostics
• HVAC 4 - HVAC System Installation & Best Practices in New Construction
• HVAC 4 - Central Air Conditioning RX
• HVAC 4 - Sizing Heating Systems
• HVAC 5 - EPA ACCA QI Specifications: Feedback from the Frontlines
• HVAC 5 - Ducts: Installation & Design
• HVAC 5 - Central Air Conditioning: Principles & Performance
• HVAC 5 - HVAC Quality Control: EPA / ACCA Specifications & QIV
• HVAC 6 - New Technologies in Energy Efficiency (HVAC focus)
• HVAC 6 - Understanding 80+ & 90+ % Efficient Gas Furnaces
• HVAC 7 - Solid Fuel Opportunities & Inspection
• HVAC 8 - HVAC: New & Emerging Technology
• HVAC 9 - New Technology for Oil Systems
• IMP 4 - Integrating Evaluation: Continuous Program Improvement
• IMP 5 - Comprehensive Energy Program Evaluation
• IMP 6 - How Energy Efficiency Can Reduce Bill Susidization
• IMP 7 - Balancing Energy Efficiency with Resident Health in Low-Income Weatherization
• IMP 8 - Maintaining Operational Efficiencies As You Scale Up
• INSP 1 - Cape Cods & 1 1/2 Story Homes: Adding Space During a Remodel
• INSP 2 - Dealing with Cathedral Ceilings & Conditioned Attics
• INSP 3 - Basement Conversions
• IR 4 - Using IR to Diagnose & Sell the Job
• IR 5 - Recognizing Thermal Patterns Related to Insulation, Air Leakage, & Moisture with IR
• LEAR 1 - Diagnostics: What's Gone Wrong & What's Next
• LEAR 2 - Challenging Conventional Wisdom: The Interaction of House Design & Energy Efficiency
• LEAR 3 - Crawl Space Challenges & Solutions
• LEAR 4 - Measures that Save the Most Energy
• LEAR 5 - Worst Case Depressurization
• LEAR 6 - Attached Housing Technical Issues
• LIGHT 4 - Lighting Design Basics
• LIGHT 5 - Lighting: Performance & Applications
• LOAD 6 - Electric Baseload Audits: Meters & Tools
• LOAD 7 - CFL Persistence & Savings
• LOAD 8 - Trends in Efficient Lighting: What Products are Available
• LOAD 9 - The Cold Facts: Refrigerator & Freezer Replacement
• LOOK 1 - The Bionic Audit
• LOOK 2 - Zonal Pressure Diagnostics: When, Where, & How
• LOOK 3 - IR: Recognizing Thermal Patterns
• LOOK 4 - Electric Baseload: A Thousand Tiny Bites
• LOOK 5 - Combustion Safety Testing
• LOW 1 - Party Walls: Opportunities, Differences, & Complications
• LOW 2 - Getting Work Done Beyond Weatherization
• LOW 2 - Durability Issues in Low Rise Buildings
• LOW 3 - Air Sealing in Low Rise Buildings
• MAM 03 - The Well Plumbed House: Principles (Part 1)
• MAM 04 - Auditing Multifamily Buildings (Part 1
• MAM 05 - Window Treatments: When Replacement is not an Option
• MAM 06N - Pursuing Household Electric Savings (In-field)
• MAM 07 - Practical Solar Thermal: Space & Water Heating
• MAM 08 - Using Spreadsheets: Energy Analysis & Related Tasks (Hands-on)
• MAM 08 - Intro to Building Diagnostics: Making the Invisible Visible
• MAM 09 - Troubleshooting Mold, Moisture, & IAQ Problems
• MAM 09 - Mold: Inevitable & Unacceptable
• MAM 10 - IR Case Studies
• MAM 11 - Best Practices: Insulating Attics
• MAM 11 - Using & Interpreting Static Pressure to Ensure Air Flow
• MAM 12N - Intro to Dense Packing Walls (In-field)
• MAM 13 - House Depressurization & Resilient Combustion Venting: Challenges & Solutions (Advanced)
• MAM 13N - Analyzing Electric Baseload (In-field)
• MAM 14 - Insulating Existing Homes: Best Practices for Walls
• MAM 14N - Using an Infrared Camera (In-field)
• MAM 15 - What Makes Combustion Systems Efficient, & Not [SESSION CANCELLED]
• MAM 15 - Sealing Ducts (Hands-on)
• MAM 16 - Successful Solar Thermal Application: Heating & Hot Water
• MAM 18 - Designing & Installing Mechanical Ventilation Systems
• MAM 19 - Windows: Sorting Through the Options
• MAN 1 - Multifamily Wx Lessons Learned (Best of MFB NY)
• MAN 3 - Designing & Implementing Effective Training Programs
• MARK 4 - Selling Home Performance by Educating & Offering Options
• MARK 5 - Delivering Customer Driven Solutions Based Sales
• MARK 6 - Turning Calls for Renewables into HP Packages
• MARK 7 - Attracting the Right Customer Without Spending a Bundle
• MARK 8 - Marketing Communications that Work
• MFB 4 - Heating & DWH Savings in Multifamily Buildings
• MFB 7 - Improving Windows without Replacement
• MFD 01 - Auditing Existing Homes (Intermediate)
• MFD 01N - The Garage Connection: Solving Indoor Air Quality & Comfort Problems (In-field)
• MFD 02N - Combustion Safety with Gas Appliances (HVAC Lab) [CANCELED]
• MFD 03 - Designing & Building High Performance Homes: From Habitat to High End
• MFD 04N - Techniques for Using Spray Foam & Sealants (In-field)
• MFD 05N - Auditing Multifamily Buildings (PM in-field)
• MFD 06 - Crawl Spaces: The Good, The Bad & The Ugly
• MFD 06 - Lead Sampling Technician Course [CANCELED]
• MFD 07 - Mobile Home Weatherization
• MFD HP - National Home Performance with ENERGY STAR® Symposium (Special Session)
• MOB 1 - Auditing & Inspecting the Mobile Home Envelope
• MOB 2 - Mobile Homes, Mechanical Ventilation, Pressures & Moisture
• MOB 3 - Mobile Home Diagnostics, Ducts, & Mechanical Systems
• MOB 4 - Mobile Home Weatherization (Part 1)
• MOB 5 - Mobile Home Weatherization (Part 2)
• MPM 03 - The Well Plumbed House: Applications (Part 2 Hands-on) (MAM 03 is a pre-requisite)
• MPM 04N - Auditing Multifamily Buildings (Part 2 In-field) (MAM 04 is a pre-requisite)
• MPM 05 - Selecting Windows: Products & Principles
• MPM 06 - Residential Lighting: Principles & Products
• MPM 07 - Siting Renewables
• MPM 08 - The House as a System
• MPM 08 - Get Out & Smell the Data
• MPM 09 - Finding & Fixing Carbon Monoxide Problems
• MPM 09 - Practical Applications of the Psychrometric Chart
• MPM 10 - Deep Energy Retrofits: Moving Toward Carbon Neutrality
• MPM 10N - Using & Interpreting IR (in-field)
• MPM 11 - Best Practices: Insulating Existing Walls
• MPM 11N - Pressure Balancing a House (in-field)
• MPM 12 - Sales Boot Camp for Whole House Services
• MPM 12 - Recruiting, Training, & Retaining Staff & Contractors
• MPM 13 - Move It: Fans 101
• MPM 13N - Pressure Balancing a House (In-field)
• MPM 14N - Strategic Dense Pack (in-field)
• MPM 14N - Air Sealing that Works: Products & Priorities (In-field)
• MPM 15N - Getting the Most From Your Duct Blaster (In-field)
• MPM 15N - Delta Q: Duct Leakage Testing (In-field)
• MPM 18N - Mechanical Ventilation: Verifying Field Performance (in-field)
• MT 02 - Multifamily Buildings Symposium
• MULT 1 - Party Walls in Townhomes & Rowhouses
• MULT 2 - Measuring Infiltration in Multifamily Buildings
• MULT 3 - Multifamily Building Analysis: Finding & Treating the Worst
• MULT 4 - Diagnostic Testing for Multifamily Building
• MULT 5 - Fire Code Issues in Multifamily
• NEW 1 - Cathedralized Attics: Details that Matter
• NEW 2 - On the Cutting Edge with Heat Pumps & Controls
• NEW 3 - New Gas Products for Heat & Hot Water
• NEW 4 - Air Sealing & Insulation: Products & Applications
• NEW 5 - What's New with Baseload? Plug Loads & More
• NEW 6 - Heat Pump & AC Installation & Performance: What Matters?
• PART 1 - Party Walls: Issues & Solutions
• PART 2 - 2nd Floor Comfort Issues
• PART 3 - Advanced Framing
• PART 4 - Attached Garages
• PART 5 - Conditioned Vs. Unconditioned Attics
• PART 6 - Basement Conversions
• PART 7 - Knee Wall Issues
• PART 8 - Crawl Space Techniques
• PERF 1 - Densepack: Techniques & Qualify Assurance
• PERF 2 - Townhouses & Small Multifamily
• PERF 3 - Big Ole Houses
• PERF 4 - Ranches, Bungalows, & Other Small Homes
• PERF 5 - Back to Basics: An Advanced Discussion of Balancing Building Performance
• POL 5 - Green Strings: Tying Energy Efficiency & Solar Together
• POL 8 - Whole House Retrofits Vs. Technology Rebates
• PRAC 6 - Affordable Housing: Moving to Zero Energy
• PRAC 7 - Moisture & Infiltration Issues in Modular Homes
• PRO 2 - Unvented Cathedral Ceilings
• PRO 3 - Implementing the ASHRAE 62.2 Standard
• PRO 4 - Myths and Realities of Ground Source Heat Pumps
• PRO 5 - The Latest & Greatest in Lighting
• PROD 4 - Green Materials in Home Performance
• PROD 5 - Poly in Walls: Evil or Necessity?
• PROD 6 - Flashing Windows & Doors
• PROD 8 - Foam 101: What, When, & Where?
• RES 4 - Crawl Space Research Results
• RES 5 - Reducing Asthma Triggers: Field Research Results
• RES 6 - Exterior Duct Leakage in Northern Homes (Advanced)
• RES 6 - Panel: Lessons Learned - Baseload Evaluation Results
• RES 7 - Ten Simple Things That Don't Really Do Much
• RITE 1 - Technical Challenges in New Construction
• RITE 2 - ENERGY STAR® & IAQ
• RITE 3 - Quality HVAC Installations
• RNEW 1 - Solar Thermal: Successful Applications in Heating & Hot Water
• RNEW 1 - Siting Renewables Primer
• RNEW 2 - Going Geothermal
• RNEW 2 - Residential PV Installation
• RNEW 3 - Integrating Renewables into Home Performance
• RNEW 3 - Solar Thermal: Successful DWH Applications
• RNEW 4 - PV Installation - Contractor Training (Part 1)
• RNEW 5 - PV Installation - Contractor Training (Part 2)
• SAF 6 - Fire Protection, Building Codes, & Weatherization
• SAF 9 - Avoid the Shock: Electrical Safety
• SAFE 1 - Venting Combustion Systems: Troubleshooting & Sizing
• SAFE 2 - Introduction to Combustion Safety
• SAFE 3 - Solutions to Backdrafting: Integrated Approaches
• SENS 1 - Codes & Building Science: Conflicts, Resolutions, & Results
• SENS 2 - Defining Energy Audits: Emerging Models
• SFD 01 - Residential Mold Assessment & Clean-Up
• SFD 02N - The Garage Connection: Solving CO, IAQ, & Comfort Problems (in-field)
• SHLL 1 - Insulation: Priorities, Practices, & QC
• SHLL 1 - 1 1/2 Story Homes
• SHLL 2 - Addressing Non Traditional Sidewalls
• SHLL 2 - Insulating & Air Sealing Brick Walls
• SHLL 3 - Panel - Air Sealing & Insulation Products: What Works When?
• SHLL 3 - Reducing Radon: Sub Slab Depressurization
• SHLL 4 - 1 1/2 Story Homes (Repeat)
• SHLL 4 - Air Sealing: Priorities, Practices, & QC
• SHLL 5 - Dealing with Attached Garages
• SHLL 5 - The Garage Connection: Secrets Exposed
• SHLL 6 - Window Upgrades: What's Cost Effective, When?
• SHLL 7 - Remuddling: Converted Porches, Garages, & Additions
• SHLL 8 - Insulation: Installation, Performance & Quality
• SHLL 9 - Basements: In or Out?
• SOLV 1 - The Garage Connection: Secrets Exposed
• SOLV 2 - Building Diagnostics for Town Houses & Multis
• SOLV 3 - Bringing the Ducts Inside
• SOLV 4 - The Low Load Challenge: HVAC Systems for High Performance Homes & Apartments
• SOLV 5 - Duct Leakage & Duct Sealing
• SOLV 6 - Solving Pressure Problems: Making Sure the Chimney Wins
• STAR 3 - ENERGY STAR® Labeled Homes: Sales & Marketing
• STAR 4 - EPA's Multifamily Pilot Program Update
• SUST 4 - Passive House Design: Basics & Metrics
• SUST 5 - Aggressively Efficient: A Holistic Approach to Existing Buildings
• SUST 8 - Climate Responsive Designs for Retrofit
• T -2 BEST - Cathedral Ceilings & Slopes: Insulation, Air Sealing, & Ventilation Code Issues
• T-1 BEST - Mechanical Ventilation for New & Existing Homes
• T-1 HVAC - Hot Water-Based Heating Systems: The Good & the Bad
• T-1 LIAB - Combustion Analysis: Proper Use of Your Test Equipment
• T-1 OPP - Whole House Auditing: Case Studies
• T-1 PROF - Managing Paper & Process to Grow Your Business with NY HPwES
• T-1 SOLV - Reducing Ice Dams
• T-2 HVAC - HVAC: New Technology To Battle Rising Energy Costs
• T-2 LIAB - Stop Mold
• T-2 OPP - Attached Housing Technical Issues
• T-2 PROF - Training & Retaining Staff
• T-2 SUCC - Getting What You Pay For: Air Sealing, Duct Sealing, & Insulation
• TAM 07 - Forum: Verifying Insulation Effectiveness for Existing Homes
• TAM 09 - Grade & Below-Grade Slab Moisture Problems (Advanced)
• TAM 1 - Lead Safe Work Practices (LSWP)
• TAM 11N - Intro to Pressure Diagnostics (In-field/INCAA)
• TAM 14N - Getting the Most Out of Your Blower Door (In-field)
• TAM 15N - Ducts: Field Practical Corrections for Existing Homes (In-field)
• TAM 16N - Mechanical Ventilation Systems: Verifying Performance (In-field)
• TAM 18 - Mold - Inevitable & Unacceptable
• TAM C - Preventing & Fixing Wet Basements
• TC&S 5 - Training Sub-Contractors for Effective Program Support
• TC&S 6 - Training: From Ground Zero to Evaluation and Beyond
• TC&S 8 - When Building Science & Codes Conflict
• TECH 1 - Air Sealing & Insulation: Tricks of the Trade
• TECH 2 - Troubleshooting Comfort Complaints
• TECH 7 - Insulating Mobile Home Wall & Roof Cavities
• TECH 8 - Kneewall Attics & Attic Conversions
• TEV A - Surviving Mold
• TEVE - The New ASHRAE 62.2 Standard: How it Affects You (Advanced)
• TEVE - Northwest Vented Crawl Spaces on Trial
• TEVE 2 - Role Play: Selling Home Performance Services
• TEVE 2 - Role Play: Selling Home Performance Services
• TFD 04N - Complete Mobile Home Weatherization (In-field)
• THAM 1 - Targeted Densepack (Advanced) (REPEAT) (In field)
• THAM 2 - Finding and Fixing CO in Kitchen Ranges (In field)
• THAM 3 - Mechanical Ventilation: Performance Diagnostics (in field)
• THAM 4 - IR Scanning (REPEAT) (In field)
• THAM 5 - The Garage Connection: Solving Indoor Air Quality & Comfort Problems (In field)
• THER 1 - Understanding Thermal & Pressure Boundaries
• THER 1 - Quality Control & Getting Buildings Tight
• THER 2 - Window Retrofitting
• THER 2 - Insulation: Making the Grade
• THER 3 - So You Think You're Densepacking?
• THER 3 - IR: Recognizing Thermal Patterns Related to Insulation, Air Leakage, & Moisture
• THER 4 - Strategic Air Sealing with One & Two Part Foam
• THER 4 - Air Sealing Priorities & Practices
• THER 5 - Insulating & Air Sealing Attics
• THER 5 - Attics: Air Sealing Challenges & Best Practices
• THER 6 - Infrared: Ulitmate Diagnostics, Ultimate Education
• ThPM 01 - Home Energy Audits In the Spotlight
• ThPM 02N - Central Air Conditioning: Assessing Field Performance (HVAC Lab)
• ThPM 03 - Achieving Quality in New Construction & Rehab
• ThPM 03 - Sell Solutions, Don't Buy Problems
• ThPM 04 - Central Air Conditioning: Actual Vs. Predicted Performance
• ThPM 04N - Air Sealing That Works - Quality Assurance: Real Time! (In-Field) (SESSION FULL)
• ThPM 05 - Radiant Heating & Cooling: Design & Components
• ThPM 05 - Sound Principles & Solutions for Quiet Homes
• ThPM 06 - Mechanical Ventilation Retrofits for Multifamily Buildings (Advanced)
• ThPM 07 - The Water Heater Autopsy (Hands-on)
• ThPM 07 - Using & Interpreting IR (Advanced)
• ThPM 08 - Practical In-house Monitoring for Assessment & Feedback
• ThPM 08 - Strategic Air Sealing with One & Two-Part Foam
• ThPM 09N - Conducting a Moisture Assessment (in-field)
• ThPM 09N - Getting the Most from Your Duct Blaster (In-field)
• THPM 1 - Measuring & Predicting Worst-Case Depressurization (REPEAT) (In field)
• ThPM 10 - IR Challenge: Honing Your IR Skills
• ThPM 10 - Different Paths to New Low Energy Homes
• ThPM 11N - DeltaQ - Duct Testing (In-field)
• ThPM 12 - Effective Communication for Improved Outcomes
• ThPM 13 - Sustainable Lighting Products, Practices, & Principles
• ThPM 14 - Insulating Existing Homes: Best Practices for Attics
• ThPM 15 - Multifamily Air Sealing - Mid & High–Rise (Hands-on)
• ThPM 16 - Designing & Sizing Duct Systems
• THPM 2 - Electric Baseload Audit (REPEAT) (In field)
• THPM 3 - Quantifying Duct Leakage (In field)
• THPM 4 - Air Sealing & QC (REPEAT) (In field)
• THPM 5 - Finding & Fixing CO in Gas Furnaces (REPEAT) (In field)
• TPM 06 - Moisture Physics (Advanced)
• TPM 09 - Thinking Thermally & Tools for IR Imaging
• TPM 1 - Getting the Most From Your Duct Blaster®
• TPM 13N - Densepack - Accessing Sidewalls for Wall Insulation (In-field)
• TPM 14N - Targeted Densepack (Advanced) (In-field)
• TPM 15 - Measuring Airflow in Ducts (Hands-on)
• TPM 18 - The House as a System
• TPM 19 - Mechanical Ventilation System Design
• TPM A - Solving IAQ & Moisture Probelems
• TPM B - Air Sealing: Tools & Techniques
• TPM C - Doing Ducts Right
• TPM E - Central Air & Heat Pumps: How Installation Affects Performance
• VENT 1 - Tools for the Ventilation Toolbox
• VENT 1 - Exhaust Only Ventilation: Doing it Right
• VENT 2 - Ventilating with Forced Air Handlers: Pros & Cons
• VENT 2 - Alternatives to Exhaust Only Ventilation
• VENT 3 - ASHRAE Standard 62.2 Update (Advanced)
• VENT 3 - Issues with ASHRAE 62.2 (Advanced Session)
• W-1 BEST - Selecting Products for Air Sealing & Insulation
• W-1 HVAC - Practical Duct Modifications
• W-1 LIAB - Improving Profitability Through Internal Quality Assurance
• W-1 OPP - Get the Most From Your Blower Door
• W-1 PROF - Frontline Communication 101: Conveying Home Performance Benefits
• W-1 SOLV - Fixing Wet Basements
• W-1 SUCC - New Construction NY Code Update
• W-2 BEST - Air Sealing: Priorities & Practices
• W-2 HVAC - Central Air Conditioning: Design, Testing, & Installation
• W-2 LIAB - Measuring & Predicting Worst Case Depressurization
• W-2 PROF - Home Performance w/ ENERGY STAR: Toward Comprehensiveness
• W-2 SOLV - Using & Interpretting Infrared
• W-2 SUCC - Moisture Management for New Homes
• W-3 BEST - Insulation: Installation & Performance
• W-3 HVAC - Duct Design & Sizing
• W-3 LIAB - Preventing & Resolving Disputes Without a Lawyer
• W-3 SOLV - The Garage Connection
• WAM 1 - IR Scanning (In field)
• WAM 3 - Air Sealing & QC (In field)
• WAM 4 - Targeted Densepack (Advanced) (In field)
• WAM 5 - Finding & Fixing CO in Gas Furnaces (In field)
• WAM A - Sizing Heating and Cooling Systems
• WAM B - Green and Healthy High Performance Construction (and Rehab)
• WAM C - Missed Opportunities for Comfort and Efficiency: Understanding Thermal Boundries
• WAM D - Air Sealing: Tools and Techniques (REPEAT)
• WAM E - Doing Ducts Right (REPEAT)
• WAT 1 - Saving Water: Latest Tools & Techniques
• WAT 2 - Tank Vs. Tankless Water Heaters
• WAT 3 - Making Sense of Water Conservation
• WC 1 - Ducts Run Amuck
• WC 2 - Duct Diagnostics: Level 1
• WC 3 - Duct Diagnostics: Level 2
• WC 4 - Duct Diagnostics: Level 3
• WC 5 - Duct Design by the Book: An Intro to Manual D
• WC 6 - Practical Field Applications of Manual D
• WC 7 - Materials & Methods for Quality Duct Construction & Retrofit
• WC 8 - House-By-House, Duct-By-Duct:House/Duct Configurations, Problems, & Solutions
• WET 1 - Wet, Moldy Attics & Ice Dams
• WET 1 - Preventing Moisture Failures in Buildings
• WET 2 - Stucco Failures & Solutions
• WET 2 - Practical Applications of the Pschrometric Chart
• WET 3 - Low Cost Moisture Solutions
• WET 3 - Low Cost Moisture Solutions
• WET 4 - Crawl Space Field Research Results: How's It Looking?
• WET 5 - Regional Best Practices: Crawl Space Treatments
• WET 6 - Recognizing & Preventing IAQ & Moisture Problems (Part 1)
• WET 7 - Recognizing & Preventing IAQ & Moisture Problems (Part 2)
• WET 8 - Regional Best Practices: Crawl Space Treatments (Repeat)
• WET 9 - Mold: What Wx Providers Need to Know
• WEVE 1 - Panel: Closing the Gap: Rated vs Monitored Performance of HVAC Equipment
• WEVE 2 - Using the Media to Sell the Whole House Approach
• WEVE 2 - Home Performance Analyst Standard Update: BPI & RESNET Collaboration
• WHOL 4 - Using Quality Management to Prevent Project Meltdowns
• WHOL 5 - How to Thrive in a "Fee For Service" World
• WHOL 7 - Bionic Audit: Productivity Tools & Enhancements
• WHOL 8 - Solving Physical Barriers to Energy Saving Measures
• WORK 1 - Panel: Challenges in Green Collar Workforce Development
• WORK 2 - Panel: Recruiting a Green Collar Workforce
• WORK 3 - Panel: Educating the Green Collar Workforce
• WPM 1 - Duct Triage: Best Practices for Existing Homes (In field)
• WPM 2 - Conducting a Moisture Assessment (In field)
• WPM 3 - Electric: Baseload Audit (In field)
• WPM 4 - Measuring & Predicting Worst-Case Depressurization (In field)
• WPM 5 - Getting the Most from Your Blower Door (Advanced) (In-field)
• WPM A - More on 10 Ways to Undermine Comfort & Customer Satisfaction
• WPM B - The New ASHRAE 62.2 Ventilation Standard: How it Affects You
• WPM C - Insulation, Installation, and Performance
• WPM E - Preventing & Fixing Wet Basements