Residential Energy Services Network (RESNET)

The Residential Energy Services Network's (RESNET) mission is to improve the energy efficiency of the nation's housing stock and to qualify more families for home ownership by expanding the national availability of mortgage financing options and home energy ratings. RESNET is a membership 501(C)3 non profit organization. RESNET's activities are focused on:

1. Adopting and maintaining the national standards for home energy ratings
2. Accrediting home energy rating providers, energy rating training providers, and home energy rating software programs
3. Working with the mortgage industry in developing innovative residential energy efficiency financing products
4. Educating the public and the housing industry on the benefits of residential energy efficiency

Other Courses in this CEU:

• W-3 OPP - What Saves Energy: How Much? What Matters?
• ADV 1 - Financing Whole House Retrofits
• AIR 1 - Selecting Registers for Comfort
• AIR 2 - AC & Heat Pump Performance
• AIR 3 - Designing an Effective Ventilation System
• AIR 4 - Correcting Low Airflow
• AIR 5 - Duct Leakage & Duct Sealing
• AIR 6 - Field Results on Delta-Q for Quantifying Duct Leakage
• AIR 7 - Practical Duct Modifications
• AIR 8 - Demystifying the Airs Combustion, Ventilation, & Make-up
• AIR 9 - Mechanical Ventilation for Existing Homes: What Works?
• AUD 1 - Energy Performance Scoring of Existing Homes
• AUD 2 - What's an Audit?: Simple through Comprehensive
• AUD 3 - RESNET Existing Homes Audit Standard
• AVE 1 - Deep Energy Reduction & the Existing Homes Sector
• AVE 2 - Developing a Green Collar Workforce (Panel)
• AVE 3 - Insulating Existing Homes: Treating Them from the Outside
• AVE 4 - Renewable Developments In New England
• AVE 5 - Passive House Design
• BAS 1 - The House as a System
• BAS 1 - Combustion Safety
• BAS 2 - Heat Loss & Heat Gain
• BAS 3 - House as a System
• BAS 4 - Moisture Physics 101
• BAS 4 - The House as a System (Repeat)
• BAS 5 - Intro to Mechanical Ventilation
• BAS 5 - Not Just Hot Air: Heating Systems Basics
• BAS 6 - Where's the Q in Indoor Air Quality?
• BAS 7 - Energy Opportunities & Priorities
• BAS 8 - Intro to Air Pressure
• BASE 6 - Lighting: Products, Quality, & Savings
• BASE 7 - High Efficiency DHW Technologies - Fact or Fiction?
• BASE 8 - Single Family DHW Distribution Design Solutions
• BEY 4 - Paths to Deep Energy Reductions in Existing Homes
• BEY 5 - High R-Wall Systems for Deep Energy Reductions
• BEY 6 - Low Load Challenge: Rethinking Mechanical Systems
• BEY 7 - Case Studies: Deep Energy Reductions
• BEY 8 - Breaking the Cost Barrier - Re-Evaluating Cost Effectiveness
• BLD 4 - Cathedral/Conditioned Attics
• BLD 5 - Windows: Sorting Through the Options for New Homes
• BLD 6 - Durable Wall Systems
• BLD 7 - Systems Approach to High Performance Homes (& Tax Credits)
• BLD 8 - Addressing Thermal Bypasses in New Construction
• BUS 1 - Contractor Success Stories & Guerrilla Marketing Techniques
• BUS 1 - Home Performance Analyst: The New BPI & RESNET Standard Update
• BUS 1 - Conveying the Value of ENERGY STAR® to Your Customers
• BUS 1 - Marketing Strategies & Techniques for the HP Contractor
• BUS 1 - Marketing Home Performance Services
• BUS 2 - Home Performance Consulting
• BUS 2 - Home Performance Sales on Steroids
• BUS 2 - Communication: Client Education & Customer Service
• BUS 2 - Different Home Performance Business Models
• BUS 2 - Business Management Systems for Whole House Contractors (Part 1)
• BUS 3 - Structuring the Contract
• BUS 3 - Home Performance Sales Techniques: How to Win the Job
• BUS 3 - Meeting the Requirements of the EPA ENERGY STAR® Homes Thermal Bypass Checklist
• BUS 3 - Eight Simple Things to Jump Start Your Business
• BUS 3 - Business Management Systems for House House Contractors (Part 2)
• BUS 4 - What is the Home Performance Contracting Opportunity?
• BUS 4 - Selling Whole House Services
• BUS 4 - Update on ENERGY STAR® IAQ Package
• BUS 4 - Business Management Systems for Building Performance Contractors (Part 1)
• BUS 4 - Connecting the Dots: NW Energy & Green Programs
• BUS 4 - Selling Home Services Performance Boot Camp (Part 1)
• BUS 5 - How Not to Get Sued
• BUS 5 - Home Performance Contractor Success Stories
• BUS 5 - Tax Primer: Taking Advantage of New & Existing Credits
• BUS 5 - Selling Home Performance Services Boot Camp (Part 2)
• BUS 5 - Making Sure of Job Quality
• BUS 5 - Business Management Systems for Building Performance Contractors (Part 2)
• BUS 6 - Selling Home Performance
• BUS 6 - Changing Consumer Perception & Demand
• BUS 6 - Team Up to Go Green: Design to Finish
• BUS 7 - Streamlining Home Diagnosis
• BUS 7 - Financing Opportunities for Home Performance Contractors
• BUS 7 - Systems & Methods for Increasing Profitability
• BUS 8 - Home Performance Best Practice Protocols
• BUS 8 - Dealing with Job Stoppers
• BUS 8 - Growing Your Business into Home Performance
• C&S 4 - ENERGY STAR® Homes as Code
• C&S 5 - Quality Management for Delivering Quality HVAC Installations
• C&S 6 - 2009 IECC: Everything You Wanted to Know, But Were Afraid to Ask
• C&S 7 - BPI & RESNET's Joint Home Performance Analyst Certification & Training
• C&S 8 - Inspection Standards & Protocols for Building Thermographers
• CARB 1 - Climate Change & the Residential Sector: Concepts & Terms
• CARB 2 - Residential Efficiency Programs: Lessons Learned
• CARB 3 - Policy Helps & Hindrances for Residential Climate Initiatives
• COMF 1 - Working with Technicians to Correct Low Air Flow
• COMF 1 - Mechanical Humidity Control Research Update
• COMF 1 - Principles of Thermal Comfort
• COMF 2 - Ductless (Mini-Split) Heat Pumps: Everywhere But Here
• COMF 2 - Tailoring Air Conditioning For Your Climate
• COMF 2 - Selecting Registers for Comfort
• COMF 3 - Local Space Heating & Cooling: Ductless & Pipeless
• COMF 3 - Creating Comfort Zones
• COMF 3 - Ducts: What Matters?
• COMF 4 - Choosing Mechanical Systems
• COMF 4 - Thermal Radiation: Radiant Barriers, Radiant Heat, Comfort, & Myths
• COMF 4 - Cool Roofs for a Warming Planet
• COMF 5 - Mechanical Solutions for Humidity Control
• COMF 5 - Envelope Solutions for Comfort
• COMF 6 - Mechanical Solutions for Humidity Control
• COMF 6 - Radiant Heat Transfer
• COMF 6 - Efficient Space & Water Heating: Fact & Fiction
• COMF 7 - Duct Design Strategies
• COMF 7 - Duct Design & Register Selection
• COMF 7 - Radiant Heating & Cooling 101
• COMF 8 - Second Floor Comfort Issues & Solutions
• COMF 8 - It's Not the Heat, It's the Humidity
• COMF 8 - Selecting Registers for Air Flow & Comfort
• CONS 1 - Innovative Approaches to Energy Education
• CONS 2 - Kits Vs. Install: Mass Distribution Strategies & Results
• CONS 3 - Community Efficiency & Sustainability Initiatives
• CONS 4 - Consumer Feedback Devices
• DEEP 1 - The Low Load Challenge: Mechanical Systems for High Performance Homes & Apartments
• DEEP 2 - Affordable & High Performance: New Construction & Rehab Case Studies
• DEEP 3 - Gut Rehab Deep Energy Retrofits: A Case of Reality
• DEEP 4 - Positive Net Energy Homes: The Passive House Concept
• DEEP 5 - Access to Resources for Green & Deep: Accelerating the Learning Curve
• DEEP 6 - Cost-Optimized Low Energy New Homes: Case Studies
• DEVL 1 - Advanced Building Techniques: What Matters & How to Get it Done?
• DEVL 2 - Air Sealing: Priorities, Techniques, & Products
• DEVL 3 - Duct Leakage Tests: What Don't They Mean?
• DEVL 4 - Achieving Correct Airflow, the Missing Comfort Link
• DEVL 5 - Bringing the Ducts Inside
• DEVL 6 - Best Practices: Insulating Closed Cavity Walls
• DIAG 1 - Panel: Worst Case Depressurization (Advanced)
• DIAG 2 - Care & Feeding of Your Diagnostic Equipment
• DIAG 3 - Zonal Pressure Diagnostics: When Needed & Lessons Learned
• DIAG 4 - Moisture Measurement
• DIAG 4 - House Interactions: Unintended Consequences with Combustion Equipment
• DIAG 4 - Streamlining Diagnostics
• DIAG 4 - Using the Duct Blaster
• DIAG 5 - Using & Interpreting Infrared
• DIAG 5 - Combustion Analysis: Proper Use of Your Test Equipment
• DIAG 5 - Advanced Blower Door Diagnostics
• DIAG 5 - Getting Started Successfully with IR
• DIAG 6 - Diagnosing High Efficiency Gas Heating Systems
• DIAG 6 - Combustion Appliance Zone (CAZ) Testing
• DIAG 6 - Worst-Case Draft: What Do the Numbers Mean?
• DIAG 7 - Zonal Pressure Diagnostics
• DIAG 7 - Tuning Combustion Equipment for Peak Performance
• DIAG 7 - Using & Interpreting IR
• DIAG 8 - Using and Interpreting Infrared
• DIAG 8 - Monitoring Tools for In-House Feedback & Verification
• DIAG 8 - The Latest on the Delta-Q Test for Duct Leakage
• DONE 1 - Lighting: Products & Practices for Big Savings
• DONE 2 - Cost Effective & Practical: Implementing High Performance, Green New Homes
• DONE 4 - So You Think You Are Densepacking?
• DONE 5 - Feedback from Builders & Contractors: Energy Efficiency Program Concerns
• DONE 6 - Implementation Challenges: Specs that Work
• DRY 2 - Mechanical Ventilation: Challenges for Existing Homes (Advanced)
• DRY 4 - Flashing Products & Methods for Windows & Doors
• DRY 5 - Mechanical Ventilation Installation: Details that Make the Difference
• DRY 6 - Insulating Existing Basements (Advanced)
• DRY 7 - Crawl Space Solutions: Measured Results
• DUR 1 - Combustion Safety & Energy Efficiency: Good News - Bad News
• DUR 1 - Moisture & Mold: Causes, Solutions, & Prevention (PART 1)
• DUR 2 - Crawl Space Research Results from the Pacific Northwest
• DUR 2 - Moisture Management for New Construction
• DUR 2 - Moisture & Mold: Causes, Solutions, & Prevention (PART 2)
• DUR 3 - Mechanical Ventilation Systems: Effectiveness & Operating Costs
• DUR 3 - Combustion Saftey: Do No Harm
• DUR 4 - The Garage Conneciton Not the Twilight Zone
• DUR 4 - Walls & Water: Consensus & Controversies
• DUR 5 - Solving IAQ & Moisture Problems in Multifamily Buildings
• DUR 5 - Moisture Management in New Homes
• DUR 5 - Achieving High Performance: What Can I Learn from Tribal Housing in Alaska?
• DUR 6 - Mechanical Ventilation Systems: Effectiveness & Operating Costs
• DUR 6 - Mechanical Ventilation & IAQ
• DUR 6 - Fixing Wet Crawl Spaces
• EFF 4 - Attic Prep & Bypass Sealing
• EFF 5 - Insulating & Air Sealing Brick Walls: New & Old
• EFF 7 - Crawl Space Techniques
• EFF 8 - Preventing & Solving Wet Attics & Ice Dams
• ELEC 4 - Micro-Cogeneration: Is There a Kilowatt in Your Future?
• ELEC 5 - Lighting: CFLs & Beyond
• ELEC 6 - Reducing Cooling Loads
• ELEC 7 - Humidity Control: Reducing the Loads
• ELEC 8 - Using Smart Technology to Implement Demand Side Management
• ENCL 4 - Sidewall Insulation Tips & Techniques
• ENCL 5 - Beyond R-Value
• ENCL 6 - Superinsulation Details: Retrofits & New Homes
• ENCL 7 - The Many Faces of Spray Foam
• ENCL 8 - Sealing Key Junctures
• FEED 4 - Home Feedback Systems: What's Going on Here?
• FEED 5 - Energy Audit & Rating Tools
• FEED 6 - Get In, Get Out, Get Diagnostics Right
• FEED 7 - Thinking Thermally: Infrared Thermography for Building Diagnostics
• FEED 8 - Moisture Diagnostics
• FIX 1 - Get Down with Basement Conversions
• FIX 3 - Findiing & Fixing Key Junctions: Existing Homes
• FPM 08N - Advanced Training for REMRate Software Users
• FUND 1 - Heating System Basics
• FUND 1 - House as a System
• FUND 1 - Moisture & Mold in Homes: Facts Vs. Fiction
• FUND 1 - Heat, Air, & Moisture Flow: House as a System
• FUND 1 - Combustion System Efficiency
• FUND 1 - The House as a System
• FUND 1 - Introduction to the House as a System
• FUND 2 - Understanding Building Pressures
• FUND 2 - Moisture Sources & Transport
• FUND 2 - Conveying Energy Concepts: Energy Use, Cost, & Carbon Impacts
• FUND 2 - Building Energy Use Fundamentals
• FUND 2 - Zonal Pressure Diagnostics: When, Where, & How
• FUND 2 - Insulation & Air Sealing: Principles, Priorities, & Performance
• FUND 3 - Moisture Impacts, Sources & Remedies
• FUND 3 - Dealing with the Job Stoppers
• FUND 3 - What Works & Why: Real World Results
• FUND 3 - Prioritizing Energy Savings: What's Important?
• FUND 3 - Understanding Heating & Cooling Loads
• FUND 4 - Prioritizing Energy Saving Recommendations
• FUND 4 - Ducts: What Matters?
• FUND 4 - Defining Thermal & Pressure Boundaries
• FUND 4 - Combustion Safety Testing
• FUND 4 - The House as a System
• FUND 4 - The Impact of Moisture on Buildings
• FUND 4 - Hydronics 101: Best Practices and Opportunities for Improvements
• FUND 5 - Combustion Safety
• FUND 5 - Energy Flow Fundamentals
• FUND 5 - Venting Combustion Appliances: Recognizing & Ensuring Reliable Performance
• FUND 5 - Combustion Safety Testing
• FUND 5 - Capturing Electric Baseload Savings
• FUND 5 - Understanding Building Pressures
• FUND 6 - Baseload Basics
• FUND 6 - Intro to HVAC Systems: Efficiency & Performance
• FUND 6 - Venting Combustion Appliances
• FUND 6 - Fostering Behavior Change: From Energy Tips to Sustainability
• FUND 6 - The Basic Ingredients of Good Indoor Air Quality
• FUND 7 - Moisture Physics
• FUND 7 - Mechanical Ventilation: Sorting Out the Options
• FUND 8 - Home Energy Mythbusting
• FUND 8 - Heating & Cooling: Sorting Out the Options
• GAS 1 - Reducing Greenhouse Gases in Middle Class Homes
• GRN 1 - Solar Applications for the Pacific Northwest
• GRN 1 - What's Available? NJ Program Info & Incentives
• GRN 3 - Thinking Small: Understanding Zero-Energy Homes
• GRN 3 - Taking the LEED for Homes in the Northwest
• GRN 3 - Affordable Housing Goes Solar
• GRN 4 - Tying Energy Efficiency into Housing Design
• GRN 4 - Understanding the IECC & Code Changes in NJ & PA
• GRN 5 - Greener Homes: Achieving Health, Safety, & Durability
• GRN 5 - Toward Zero Energy Homes (New & Existing)
• GRN 5 - Residential Green: Local Case Studies
• GRN 6 - Residential Photovoltaics: Installation Methods in New & Existing Homes
• GRN 8 - Are Green Building Criteria Full of BS? (Building Science, that is)?
• H&C 1 - Emerging HVAC Technology & Practices
• H&C 2 - Emerging Issues in Residential HVAC
• H&C 4 - House Depressurization & Combustion Safety
• H&C 5 - How to Get the Heat Out of a Heat Pump
• H&C 8 - Practical Duct Modifications
• H2O 1 - Hot Water Forum: Heating, Distribution, Water Use
• H2O 2 - Solar Water Heating - The Real Deal
• H2O 3 - Tank Vs. Tankless Gas Water Heaters - How's a Person to Choose?
• HEAL 1 - Green Is Hot, But Is It Healthier?
• HEAL 1 - Understanding & Solutions for Water Intrusions in Crawl Spaces
• HEAL 2 - Wet Basements & Radon: Common Solutions
• HEAL 2 - Challenge of Applying ASHRAE 62.2 in Existing Homes
• HEAL 3 - EPA’s New Lead Rule
• HEAL 3 - Measured Crawl Space Performance in Multiple Climates
• HEAL 4 - IAQ Details from the New EPA Indoor Air Package Guide
• HEAL 4 - Unvented Gas Heaters, Fireplaces, & IAQ
• HEAL 5 - Garage Connection
• HEAL 6 - Healthy Home Intervention Effectiveness
• HEAL 6 - Is Green Housing Healthier Housing?
• HEAL 7 - Advanced Ventilation: Optimizing Excellent Indoor Air Quality
• HEAL 8 - Don't Get Weighed Down by Lead
• HEAT 4 - Recognizing & Ensuring Reliable Venting Performance
• HEAT 6 - Advanced Heating: Gas & Oil
• HEAT 7 - Geothermal & Other High Performance Heat Pumps: Field Results
• HEAT 8 - DeltaQ Update: Using Blower Doors for Duct Leakage Testing
• HOR 4 - White Tags - Green Tags: Emerging Opportunities in EcoSystem Service Markets
• HOR 5 - European Zero Energy Retrofits
• HOR 6 - Zero Net Energy in the Pacific Northwest
• HORZ 1 - NY State Code Update
• HORZ 2 - Local & Regional Responses to Greenhouse Gases
• HORZ 3 - Details of Superinsulation Retrofits
• HORZ 4 - Energy Use: How Low Can You Go?
• HORZ 5 - Home Performance Analyst: Update on BPI/RESNET Joint Certification
• HOT 1 - Reducing Cooling Loads
• HOT 2 - Cooling the Frostbelt: Central AC in the North
• HOT 3 - Room & Central AC Triage (without an AC license)
• HOUS 1 - Beyond Demonstration Projects: 1,250 Homes & Counting
• HOUS 3 - Green Communities: Comparing & Tracking Cost Issues in Affordable Housing
• HOUS 4 - Care & Feeding of Existing Low Income Rural Housing
• HOUS 5 - Mobile Homes: The Forgotten Housing Stock
• HOUS 6 - Leveraging Employers to Facilitate Efficient Affordable Housing
• HOUS 7 - Greening Affordable Housing
• HOUS 8 - HUD Code Housing: From Zero Image to Zero Energy
• HVAC 1 - Hydronics: Basics & Operation
• HVAC 1 - Radiant Heating & Cooling
• HVAC 1 - Duct Sealing: What Matters? What Works?
• HVAC 2 - Sizing Heating & Cooling Systems
• HVAC 2 - Latest & Greatest in Heating & Cooling
• HVAC 2 - Ducts: Challenges, Diagnostics, & Solutions
• HVAC 2 - Category 1 Venting (Part 1)
• HVAC 3 - Beyond Oil Heating: Alternatives & New Technologies
• HVAC 3 - HVAC System Troubleshooting & Diagnostics
• HVAC 4 - Central Air Conditioning RX
• HVAC 4 - Downsizing Mechanical Systems After Retrofits
• HVAC 4 - HVAC System Installation & Best Practices in New Construction
• HVAC 4 - Sizing Heating Systems
• HVAC 5 - Central Air Conditioning: Principles & Performance
• HVAC 5 - Whole House Applications Ductless Minisplit
• HVAC 5 - HVAC Quality Control: EPA / ACCA Specifications & QIV
• HVAC 5 - EPA ACCA QI Specifications: Feedback from the Frontlines
• HVAC 5 - Ducts: Installation & Design
• HVAC 6 - Understanding 80+ & 90+ % Efficient Gas Furnaces
• HVAC 6 - Air Handler Flow: What is Good & How to Tell
• HVAC 6 - New Technologies in Energy Efficiency (HVAC focus)
• HVAC 7 - Fixing Performance Problems in Air Conditioning Systems
• HVAC 7 - Solid Fuel Opportunities & Inspection
• HVAC 8 - HVAC: New & Emerging Technology
• HVAC 8 - Innovative Distribution System Design Strategies (Advanced)
• HVAC 9 - New Technology for Oil Systems
• IMP 1 - Targeting & Tracking to Maximize Realized Program Savings
• INSP 1 - Cape Cods & 1 1/2 Story Homes: Adding Space During a Remodel
• INSP 2 - Dealing with Cathedral Ceilings & Conditioned Attics
• INSP 3 - Basement Conversions
• IR 4 - Using IR to Diagnose & Sell the Job
• IR 5 - Recognizing Thermal Patterns Related to Insulation, Air Leakage, & Moisture with IR
• LEAR 1 - Diagnostics: What's Gone Wrong & What's Next
• LEAR 2 - Challenging Conventional Wisdom: The Interaction of House Design & Energy Efficiency
• LEAR 3 - Crawl Space Challenges & Solutions
• LEAR 6 - Attached Housing Technical Issues
• LIGHT 4 - Lighting Design Basics
• LIGHT 5 - Lighting: Performance & Applications
• LOAD 8 - Trends in Efficient Lighting: What Products are Available
• LOOK 1 - The Bionic Audit
• LOOK 2 - Zonal Pressure Diagnostics: When, Where, & How
• LOOK 3 - IR: Recognizing Thermal Patterns
• LOOK 4 - Electric Baseload: A Thousand Tiny Bites
• LOOK 5 - Combustion Safety Testing
• LOW 1 - New Evidence on Energy Education Effectiveness
• LOW 1 - Party Walls: Opportunities, Differences, & Complications
• LOW 2 - Getting Work Done Beyond Weatherization
• LOW 2 - Durability Issues in Low Rise Buildings
• LOW 3 - Reducing Payment Assistance with Energy Efficiency
• LOW 3 - Air Sealing in Low Rise Buildings
• MAM 03 - The Well Plumbed House: Principles (Part 1)
• MAM 04 - House as a System
• MAM 04 - Auditing Multifamily Buildings (Part 1
• MAM 05 - Best Ventilation Practices for High Performance Homes
• MAM 05 - Window Treatments: When Replacement is not an Option
• MAM 06 - Home Performance Testing & Contracting
• MAM 06N - Pursuing Household Electric Savings (In-field)
• MAM 07 - Practical Solar Thermal: Space & Water Heating
• MAM 07N - Air Sealing Multifamily Buildings (In-field)
• MAM 08 - House Depressurization & Resilient Combustion Venting (Advanced)
• MAM 08 - Intro to Building Diagnostics: Making the Invisible Visible
• MAM 09 - Mold: Inevitable & Unacceptable
• MAM 09 - Troubleshooting Mold, Moisture, & IAQ Problems
• MAM 09N - Finding & Preventing Cracked Heat Exchangers (In-field)
• MAM 10 - Passiv Haus Design & Verification
• MAM 10 - IR Case Studies
• MAM 10 - Solar Thermal Design & Installation
• MAM 11 - ACCA QI Specifications - CANCELLED
• MAM 11 - Best Practices: Insulating Attics
• MAM 11 - Using & Interpreting Static Pressure to Ensure Air Flow
• MAM 12N - Densepack Sidewall Insulation Installation (In-field)
• MAM 12N - Intro to Dense Packing Walls (In-field)
• MAM 13 - House Depressurization & Resilient Combustion Venting: Challenges & Solutions (Advanced)
• MAM 14 - Insulating Existing Homes: Best Practices for Walls
• MAM 14N - Using an Infrared Camera (In-field)
• MAM 15 - What Makes Combustion Systems Efficient, & Not [SESSION CANCELLED]
• MAM 15 - Sealing Ducts (Hands-on)
• MAM 16 - Successful Solar Thermal Application: Heating & Hot Water
• MAM 17 - Different Paths to Low Energy Homes: How Low Can You Go?
• MAM 18 - Designing & Installing Mechanical Ventilation Systems
• MAM 19 - Windows: Sorting Through the Options
• MARK 4 - Selling Home Performance by Educating & Offering Options
• MARK 5 - Delivering Customer Driven Solutions Based Sales
• MARK 6 - Turning Calls for Renewables into HP Packages
• MARK 7 - Attracting the Right Customer Without Spending a Bundle
• MARK 8 - Marketing Communications that Work
• MFB 7 - Improving Windows without Replacement
• MFD 01 - Auditing Existing Homes (Intermediate)
• MFD 01 - The Devil in the Details: Superinsulating Existing Home Walls
• MFD 01N - The Garage Connection: Solving Indoor Air Quality & Comfort Problems (In-field)
• MFD 02 - LEED for Homes Program Review
• MFD 02 - Achieving Quality In a Home Performance Business
• MFD 02N - Combustion Safety with Gas Appliances (HVAC Lab) [CANCELED]
• MFD 03 - Designing & Building High Performance Homes: From Habitat to High End
• MFD 03N - Sizing Up Duct Leaks: From CFM50 to Energy Savings
• MFD 05N - Auditing Multifamily Buildings (PM in-field)
• MFD HH - Healthy Homes Specialist Certification Course & Exam
• MFD HP - National Home Performance with ENERGY STAR® Symposium
• MFD HP - National Home Performance with ENERGY STAR® Symposium (Special Session)
• MFD HP - Home Performance with ENERGY STAR Symposium
• MOB 1 - Auditing & Inspecting the Mobile Home Envelope
• MOBL 1 - Community Education: Methods & Media
• MOBL 2 - The Energy Smackdown - A Community Outreach Strategy for Reducing Carbon Emissions
• MOBL 3 - Moving from Energy to Carbon
• MOBL 4 - Climate Change: Tools for Community Action
• MOBL 5 - Valuing Non-Energy Benefits (NEBs) in Deep Energy Retrofits
• MOBL 6 - Occupant Feedback Mechanisms: Case Studies
• MOBL 7 - Case Study: Building a “Green Collar” or Energy Efficiency Workforce in Wisconsin
• MOBL 8 - Defining Green Jobs
• MON 1 - Financing Home Performance with Utility Bill Savings
• MON 2 - No House Left Behind: Delivering Energy Efficiency to Every Home
• MON 3 - New Ideas in Funding Energy Efficiency Efforts
• MPM 03 - The Well Plumbed House: Applications (Part 2 Hands-on) (MAM 03 is a pre-requisite)
• MPM 04 - Creative Comfort: Beyond Thermostat Set Point
• MPM 04N - Auditing Multifamily Buildings (Part 2 In-field) (MAM 04 is a pre-requisite)
• MPM 05 - Selecting Windows: Products & Principles
• MPM 05 - Mac on Mold
• MPM 06 - Residential Lighting: Principles & Products
• MPM 06N - Delta Q: Duct Leakage Testing (In-field)
• MPM 07 - Siting Renewables
• MPM 07N - Air Sealing that Works: Priorities & Products (In-field)
• MPM 08 - The House as a System
• MPM 08 - Get Out & Smell the Data
• MPM 08 - Outside the Box: Affordable Energy Efficient Construction Techniques
• MPM 09 - Finding & Fixing Carbon Monoxide Problems
• MPM 09 - Practical Applications of the Psychrometric Chart
• MPM 09N - Using an IR Camera (In-field)
• MPM 10 - Photovoltaics: Design & Installation
• MPM 10 - Deep Energy Retrofits: Moving Toward Carbon Neutrality
• MPM 10N - Using & Interpreting IR (in-field)
• MPM 11 - Emerging HVAC Technologies for Retrofit & New Construction
• MPM 11 - Best Practices: Insulating Existing Walls
• MPM 11N - Pressure Balancing a House (in-field)
• MPM 12 - Recruiting, Training, & Retaining Staff & Contractors
• MPM 12N - CO Testing & Diagnostics (In-field)
• MPM 13 - Move It: Fans 101
• MPM 13N - Pressure Balancing a House (In-field)
• MPM 13N - CertainTeed Fiber Glass Plant Tour (In-field)
• MPM 14 - Apples & Oranges: An Audit is Not a Rating & A Rating is Not an Audit (Energy Software Discussion)
• MPM 14N - Air Sealing that Works: Products & Priorities (In-field)
• MPM 15N - Delta Q: Duct Leakage Testing (In-field)
• MPM 15N - Getting the Most From Your Duct Blaster (In-field)
• MPM 17 - Applying LEED for Homes
• MULT 1 - Party Walls in Townhomes & Rowhouses
• MULT 4 - Broadening Your Horizons: Getting Into Bigger Buildings
• MULT 4 - Diagnostic Testing for Multifamily Building
• MULT 5 - Fire Code Issues in Multifamily
• MULT 5 - Tall Stuff, Tall Matters: Elevators, Pumps, Ventilation, & More
• MULT 6 - Multifamily Ventilation Strategies
• MULT 7 - Fire, Smoke, Foam, & the Codes
• MULT 8 - Measuring Air Leakage in High-Rise Residential Buildings
• NEW 1 - Cathedralized Attics: Details that Matter
• NEW 2 - On the Cutting Edge with Heat Pumps & Controls
• NEW 3 - New Gas Products for Heat & Hot Water
• NEW 4 - Air Sealing & Insulation: Products & Applications
• NEW 5 - What's New with Baseload? Plug Loads & More
• NEW 6 - Heat Pump & AC Installation & Performance: What Matters?
• OPP 1 - Greensburg - A Lesson in Cooperation
• OPP 1 - Carbon Credits, Green Tags, & White Tags
• OPP 2 - Deduct Your House: The Benefits of Ductless Heat Pumps
• OPP 2 - Dealing with Disasters: Deconstrucion, Reclaim, & Reuse
• OPP 3 - Energy Performance Rehabs
• OPP 3 - New Opportunities: Electronics & Heat Pump Water Heaters
• OPP 4 - Increasing Resource Efficiency: The Water-Energy-Climate Connection
• OPP 5 - Feedback Devices: Pilot Results & Emerging Systems
• OPP 6 - Lighting: Still a Cost-Effective Resource For All
• P&P 1 - Integration of Water, Energy, Comfort, & Economic Considerations in Program Design
• P&P 2 - Energy Performance Scoring of Existing Homes & Households
• P&P 3 - Getting the Economic Signals Right for Efficient Affordable Housing
• P&P 4 - Making Marketing Effective: Insights from New Research & Programs
• P&P 5 - Cost Effectiveness: Consumer, Contractor, & Utility Perspectives
• P&P 6 - Energy Codes: Strengths, Limitations & Future Role
• PART 1 - Party Walls: Issues & Solutions
• PART 2 - 2nd Floor Comfort Issues
• PART 3 - Advanced Framing
• PART 4 - Attached Garages
• PART 5 - Conditioned Vs. Unconditioned Attics
• PART 7 - Knee Wall Issues
• PART 8 - Crawl Space Techniques
• PERF 1 - Densepack: Techniques & Qualify Assurance
• PERF 2 - Townhouses & Small Multifamily
• PERF 3 - Big Ole Houses
• PERF 4 - Ranches, Bungalows, & Other Small Homes
• PERF 5 - Back to Basics: An Advanced Discussion of Balancing Building Performance
• POL 4 - New Clean Energy Markets
• POL 5 - Green Strings: Tying Energy Efficiency & Solar Together
• POL 6 - Evaluating Peak Impacts of Energy Efficiency
• POL 7 - State Climate Policy Development in the US
• POL 8 - Whole House Retrofits Vs. Technology Rebates
• PRAC 4 - Assessing Impacts: Enterprise Green Communities
• PRAC 5 - Affordable Green: LEED for Homes & Multifamily Retrofit
• PRAC 6 - Affordable Housing: Moving to Zero Energy
• PRAC 7 - Moisture & Infiltration Issues in Modular Homes
• PRAC 8 - Panel: Going Modular with ENERGY STAR®
• PRO 1 - Consumer Feedback Devices
• PRO 2 - Vented & Unvented Cathedral Ceilings
• PRO 3 - Implementing the ASHRAE 62.2 Standard
• PRO 4 - Myths and Realities of Ground Source Heat Pumps
• PRO 5 - The Latest & Greatest in Lighting
• PROD 5 - Poly in Walls: Evil or Necessity?
• PROD 6 - Flashing Windows & Doors
• PROD 7 - New Construction Products - Picking the Right Ones
• PROD 8 - Foam 101: What, When, & Where?
• PROG 1 - Water Efficiency: Changing Programs, Policies, & Products
• PROG 2 - ENERGY STAR® Homes: Predictions, Performance, & Real World Results
• PROG 3 - Experiences with the KC Power & Light Cool Homes Program
• RES 4 - Crawl Space Research Results
• RES 5 - Reducing Asthma Triggers: Field Research Results
• RES 6 - Exterior Duct Leakage in Northern Homes (Advanced)
• RES 7 - Ten Simple Things That Don't Really Do Much
• RES 8 - ENERGY STAR® Homes Evaluation Results
• RITE 1 - Technical Challenges in New Construction
• RITE 2 - ENERGY STAR® & IAQ
• RITE 3 - Quality HVAC Installations
• RNEW 1 - Solar Thermal: Successful Applications in Heating & Hot Water
• RNEW 1 - Siting Renewables Primer
• RNEW 2 - Going Geothermal
• RNEW 2 - Residential PV Installation
• RNEW 3 - Solar Thermal: Successful DWH Applications
• RNEW 3 - Integrating Renewables into Home Performance
• RNEW 4 - PV Installation - Contractor Training (Part 1)
• RNEW 5 - PV Installation - Contractor Training (Part 2)
• SAF 6 - Fire Protection, Building Codes, & Weatherization
• SAFE 1 - Venting Combustion Systems: Troubleshooting & Sizing
• SAFE 2 - Introduction to Combustion Safety
• SAFE 3 - Solutions to Backdrafting: Integrated Approaches
• SENS 1 - Codes & Building Science: Conflicts, Resolutions, & Results
• SENS 2 - Defining Energy Audits: Emerging Models
• SENS 3 - Panel: Defining Green
• SHLL 1 - 1 1/2 Story Homes
• SHLL 1 - Insulation: Priorities, Practices, & QC
• SHLL 1 - Panel: Next Generation of Air Sealing in Existing Houses
• SHLL 2 - Basement Insulation
• SHLL 2 - Insulating & Air Sealing Brick Walls
• SHLL 3 - Panel - Air Sealing & Insulation Products: What Works When?
• SHLL 3 - Reducing Radon: Sub Slab Depressurization
• SHLL 3 - Cool Roofs for a Warming Planet
• SHLL 4 - 1 1/2 Story Homes (Repeat)
• SHLL 4 - Attic Prep & Thermal Bypass Sealing
• SHLL 4 - Air Sealing: Priorities, Practices, & QC
• SHLL 5 - The Garage Connection: Secrets Exposed
• SHLL 5 - Dealing with Attached Garages
• SHLL 5 - Insulating Brick Buildings
• SHLL 6 - Insulation - Sorting Out the Options
• SHLL 6 - Window Upgrades: What's Cost Effective, When?
• SHLL 7 - Thermal Defects: Case Studies from a Hot Dry Climate
• SHLL 8 - Venting Cathedralized Attics & Ceilings
• SHLL 8 - Insulation: Installation, Performance & Quality
• SOLV 1 - The Garage Connection: Secrets Exposed
• SOLV 2 - Building Diagnostics for Town Houses & Multis
• SOLV 3 - Bringing the Ducts Inside
• SOLV 4 - The Low Load Challenge: HVAC Systems for High Performance Homes & Apartments
• SOLV 5 - Duct Leakage & Duct Sealing
• SOLV 6 - Solving Pressure Problems: Making Sure the Chimney Wins
• STAR 3 - ENERGY STAR® Labeled Homes: Sales & Marketing
• STAR 4 - Setting the Standards for Quality Ratings
• STAR 4 - EPA's Multifamily Pilot Program Update
• STAR 5 - Enhancing the Technical Basis of HERS
• STAR 6 - Panel: Real vs Rated Energy Use
• STAR 7 - Future of ENERGY STAR® Qualified Homes: Beyond 86
• STAR 8 - Forum: Regional Challenges in ENERGY STAR® Homes
• SUST 1 - What is Green: Principles, Process, & Products
• SUST 2 - Integrating the Technical, Design, & Lifestyle Components of Sustainable Design
• SUST 3 - Walking the Talk: Merging Energy Efficiency & Renewables
• SUST 4 - Passive House Design: Basics & Metrics
• SUST 5 - Aggressively Efficient: A Holistic Approach to Existing Buildings
• SUST 6 - Building in Nature's Image
• SUST 7 - Real, Relevant, & “Doable” Green Building by Design
• SUST 8 - Climate Responsive Designs for Retrofit
• T -2 BEST - Cathedral Ceilings & Slopes: Insulation, Air Sealing, & Ventilation Code Issues
• T-1 BEST - Mechanical Ventilation for New & Existing Homes
• T-1 HVAC - Hot Water-Based Heating Systems: The Good & the Bad
• T-1 LIAB - Combustion Analysis: Proper Use of Your Test Equipment
• T-2 HVAC - HVAC: New Technology To Battle Rising Energy Costs
• T-2 LIAB - Stop Mold
• T-2 OPP - Attached Housing Technical Issues
• T-2 SUCC - Getting What You Pay For: Air Sealing, Duct Sealing, & Insulation
• TAM 14N - Getting the Most Out of Your Blower Door (In-field)
• TAM 15N - Ducts: Field Practical Corrections for Existing Homes (In-field)
• TAM 16N - Mechanical Ventilation Systems: Verifying Performance (In-field)
• TAM 17 - HERS 101
• TAM A - The House as a System
• TAM C - Preventing & Fixing Wet Basements
• TAM E - Better Design and Controls for Hydronic Systems
• TC&S 8 - When Building Science & Codes Conflict
• TECH 1 - Air Sealing & Insulation: Tricks of the Trade
• TECH 4 - Panel: Insulation Installation in New Homes: Changing the Industry
• TEV A - Surviving Mold
• TEV B - Closing the Sale
• TEV C - The House as a System (Repeat)
• TEVE - The New ASHRAE 62.2 Standard: How it Affects You (Advanced)
• TEVE - Northwest Vented Crawl Spaces on Trial
• TEVE 1 - Thousand Home Challenge
• TEVE 1 - Forum: Aggressive Residential Efficiency for Greenhouse Gas Reduction: What is Possible, What Will It Take?
• TEVE 1 - Panel - Climate Change & Peak Oil: A New Context for Residential Energy
• TEVE 1 - Accelerating Efficiency in the Northwest: Past Lessons & New Directions
• TEVE 2 - Sell Solutions, Don't Buy Problems
• TEVE 2 - Home Performance Media Forum
• TEVE 2 - Role Play: Selling Home Performance Services
• TFD - Devil in the Details: Building High Performance, Affordable, & Durable Walls
• THAM 3 - Mechanical Ventilation: Performance Diagnostics (in field)
• THAM 4 - IR Scanning (REPEAT) (In field)
• THER 1 - Understanding Thermal & Pressure Boundaries
• THER 1 - Quality Control & Getting Buildings Tight
• THER 2 - Insulation: Making the Grade
• THER 2 - Window Retrofitting
• THER 3 - IR: Recognizing Thermal Patterns Related to Insulation, Air Leakage, & Moisture
• THER 4 - Air Sealing Priorities & Practices
• THER 4 - Strategic Air Sealing with One & Two Part Foam
• THER 5 - Insulating & Air Sealing Attics
• THER 6 - Infrared: Ulitmate Diagnostics, Ultimate Education
• ThPM 01 - Return to Community: Solutions for an Uncertain Energy Future
• ThPM 01 - Home Energy Audits In the Spotlight
• ThPM 01 - Conducting an Infrared Inspection: Based on the New RESNET/BPI Standard
• ThPM 02 - Modular Housing: Going Green
• ThPM 02 - Hydronics
• ThPM 02N - Central Air Conditioning: Assessing Field Performance (HVAC Lab)
• ThPM 03 - Achieving Quality in New Construction & Rehab
• ThPM 03 - Paths to the Net Zero Fossil Carbon (p2z)
• ThPM 04 - Software Solutions for Home Performance Contractors
• ThPM 04 - Central Air Conditioning: Actual Vs. Predicted Performance
• ThPM 04N - Air Sealing That Works - Quality Assurance: Real Time! (In-Field) (SESSION FULL)
• ThPM 05 - Radiant Heating & Cooling: Design & Components
• ThPM 05 - Moisture Physics (Advanced)
• ThPM 06 - Mechanical Ventilation Retrofits for Multifamily Buildings (Advanced)
• ThPM 07 - Using & Interpreting IR (Advanced)
• ThPM 08 - Strategic Air Sealing with One & Two-Part Foam
• ThPM 09N - Getting the Most from Your Duct Blaster (In-field)
• ThPM 09N - Conducting a Moisture Assessment (in-field)
• THPM 1 - Measuring & Predicting Worst-Case Depressurization (REPEAT) (In field)
• ThPM 10 - IR Challenge: Honing Your IR Skills
• ThPM 10 - Different Paths to New Low Energy Homes
• ThPM 11N - DeltaQ - Duct Testing (In-field)
• ThPM 13 - Sustainable Lighting Products, Practices, & Principles
• ThPM 14 - Insulating Existing Homes: Best Practices for Attics
• ThPM 15 - Multifamily Air Sealing - Mid & High–Rise (Hands-on)
• ThPM 16 - Designing & Sizing Duct Systems
• THPM 3 - Quantifying Duct Leakage (In field)
• THPM 5 - Finding & Fixing CO in Gas Furnaces (REPEAT) (In field)
• ThPM WD - Report on US DOE Workforce Summit Findings
• TPM - Getting the Most From Your Duct Blaster® (In-field)
• TPM 08N - Advanced Training for TREAT Software Users (In-field/INCAA)
• TPM 1 - Getting the Most From Your Duct Blaster®
• TPM 17 - Changes in HERS Technical Standards
• TPM C - Doing Ducts Right
• TPM D - Wall System Options
• TPM E - Central Air & Heat Pumps: How Installation Affects Performance
• VENT 1 - Tools for the Ventilation Toolbox
• VENT 1 - Exhaust Only Ventilation: Doing it Right
• VENT 2 - Ventilating with Forced Air Handlers: Pros & Cons
• VENT 2 - Alternatives to Exhaust Only Ventilation
• VENT 3 - ASHRAE Standard 62.2 Update (Advanced)
• VENT 3 - Issues with ASHRAE 62.2 (Advanced Session)
• W-1 BEST - Selecting Products for Air Sealing & Insulation
• W-1 HVAC - Practical Duct Modifications
• W-1 OPP - Get the Most From Your Blower Door
• W-2 BEST - Air Sealing: Priorities & Practices
• W-2 HVAC - Central Air Conditioning: Design, Testing, & Installation
• W-2 LIAB - Measuring & Predicting Worst Case Depressurization
• W-2 SOLV - Using & Interpretting Infrared
• W-3 BEST - Insulation: Installation & Performance
• W-3 HVAC - Duct Design & Sizing
• W-3 SOLV - The Garage Connection
• WAM 1 - IR Scanning (In field)
• WAM 5 - Finding & Fixing CO in Gas Furnaces (In field)
• WAM A - Sizing Heating and Cooling Systems
• WAM B - Green and Healthy High Performance Construction (and Rehab)
• WAM C - Missed Opportunities for Comfort and Efficiency: Understanding Thermal Boundries
• WAT 1 - Saving Water: Latest Tools & Techniques
• WAT 2 - Tank Vs. Tankless Water Heaters
• WAT 3 - Making Sense of Water Conservation
• WC 1 - Ducts Run Amuck
• WC 2 - Duct Diagnostics: Level 1
• WC 3 - Duct Diagnostics: Level 2
• WC 4 - Duct Diagnostics: Level 3
• WC 5 - Duct Design by the Book: An Intro to Manual D
• WC 6 - Practical Field Applications of Manual D
• WC 7 - Materials & Methods for Quality Duct Construction & Retrofit
• WC 8 - House-By-House, Duct-By-Duct:House/Duct Configurations, Problems, & Solutions
• WET 1 - Preventing Moisture Failures in Buildings
• WET 1 - Wet, Moldy Attics & Ice Dams
• WET 2 - Practical Applications of the Pschrometric Chart
• WET 3 - Low Cost Moisture Solutions
• WET 3 - Low Cost Moisture Solutions
• WET 4 - Crawl Space Field Research Results: How's It Looking?
• WET 5 - Regional Best Practices: Crawl Space Treatments
• WET 6 - Recognizing & Preventing IAQ & Moisture Problems (Part 1)
• WET 7 - Recognizing & Preventing IAQ & Moisture Problems (Part 2)
• WET 8 - Regional Best Practices: Crawl Space Treatments (Repeat)
• WEVE - Ethics in Weatherization
• WEVE 1 - Energy, Behavior, & Education Forum
• WEVE 1 - Stand Out From Your Competition: Incorporating Energy Efficiency & Green into Remodeling Jobs
• WEVE 1 - Game Changing Innovations in Energy Efficiency
• WEVE 1 - Panel: Closing the Gap: Rated vs Monitored Performance of HVAC Equipment
• WEVE 1 - Roundtable: Lessons Learned NW ENERGY STAR® Homes
• WEVE 2 - Home Performance Analyst Standard Update: BPI & RESNET Collaboration
• WEVE 2 - How Good is Good Enough? Rethinking Walls: Options for Superinsulation in New & Existing Homes
• WEVE 2 - Why LEED® Buildings Use More Energy Than Comparable Buildings, & How Serious Practitioners Can Avoid the Same Results (Where LEED Is Not Yet Required by Law)
• WEVE 3 - Roundtable: Ramping Up: Juggling Productivity, Quality, & Sanity
• WEVE 3 - Panel: Energy Affordability - Not Just a Low Income Problem Anymore
• WHOL 4 - Using Quality Management to Prevent Project Meltdowns
• WHOL 5 - How to Thrive in a "Fee For Service" World
• WHOL 6 - Program Admin Using Web-Based Information Management Tools
• WHOL 7 - Bionic Audit: Productivity Tools & Enhancements
• WHOL 8 - Solving Physical Barriers to Energy Saving Measures
• WORK 1 - Panel: Challenges in Green Collar Workforce Development
• WORK 2 - Panel: Recruiting a Green Collar Workforce
• WORK 3 - Panel: Educating the Green Collar Workforce
• WPM 1 - Duct Triage: Best Practices for Existing Homes (In field)
• WPM 2 - Conducting a Moisture Assessment (In field)
• WPM 4 - Measuring & Predicting Worst-Case Depressurization (In field)
• WPM 5 - Getting the Most from Your Blower Door (Advanced) (In-field)
• WPM A - More on 10 Ways to Undermine Comfort & Customer Satisfaction
• WPM B - The New ASHRAE 62.2 Ventilation Standard: How it Affects You
• WPM C - Insulation, Installation, and Performance
• WPM E - Preventing & Fixing Wet Basements