National Association of Certified Home Inspectors (NACHI)

NACHI, a non-profit organization, is devoted to maintaining the highest standards of the trade. NACHI certification requires that inspectors pass an Inspector Examination, take a Standards of Practice Quiz and adhere to those standards, complete a Code of Ethics Course and abide by that code, and attend continuing education courses to maintain certification.

Other Courses in this CEU:

• AIR 1 - Selecting Registers for Comfort
• AIR 2 - AC & Heat Pump Performance
• AIR 7 - Practical Duct Modifications
• AIR 8 - Demystifying the Airs Combustion, Ventilation, & Make-up
• BAS 1 - Combustion Safety
• BAS 1 - The House as a System
• BAS 2 - Heat Loss & Heat Gain
• BAS 2 - Intro to Diagnostics: Whazzit Mean?
• BAS 3 - House as a System
• BAS 4 - Moisture Physics 101
• BAS 4 - The House as a System (Repeat)
• BAS 5 - Not Just Hot Air: Heating Systems Basics
• BAS 5 - Intro to Mechanical Ventilation
• BAS 6 - Where's the Q in Indoor Air Quality?
• BAS 8 - Intro to Air Pressure
• BLD 4 - Cathedral/Conditioned Attics
• BLD 5 - Windows: Sorting Through the Options for New Homes
• BLD 6 - Durable Wall Systems
• BLD 8 - Addressing Thermal Bypasses in New Construction
• BUS 1 - Conveying the Value of ENERGY STAR® to Your Customers
• BUS 4 - What is the Home Performance Contracting Opportunity?
• BUS 5 - Home Performance Contractor Success Stories
• BUS 6 - Team Up to Go Green: Design to Finish
• BUS 7 - Financing Opportunities for Home Performance Contractors
• BUS 8 - Growing Your Business into Home Performance
• CARB 1 - Climate Change & the Residential Sector: Concepts & Terms
• CARB 2 - Residential Efficiency Programs: Lessons Learned
• CARB 3 - Policy Helps & Hindrances for Residential Climate Initiatives
• COMF 1 - Working with Technicians to Correct Low Air Flow
• COMF 2 - Ductless (Mini-Split) Heat Pumps: Everywhere But Here
• COMF 3 - Local Space Heating & Cooling: Ductless & Pipeless
• COMF 3 - Ducts: What Matters?
• COMF 4 - Cool Roofs for a Warming Planet
• COMF 4 - Choosing Mechanical Systems
• COMF 5 - Mechanical Solutions for Humidity Control
• COMF 5 - Space Heaters & Fireplaces
• COMF 6 - Efficient Space & Water Heating: Fact & Fiction
• COMF 7 - Radiant Heating & Cooling 101
• COMF 8 - Selecting Registers for Air Flow & Comfort
• CONS 1 - Innovative Approaches to Energy Education
• CONS 2 - Kits Vs. Install: Mass Distribution Strategies & Results
• CONS 3 - Community Efficiency & Sustainability Initiatives
• DIAG 2 - Care & Feeding of Your Diagnostic Equipment
• DIAG 5 - Using & Interpreting Infrared
• DIAG 6 - Worst-Case Draft: What Do the Numbers Mean?
• DIAG 7 - Using & Interpreting IR
• DUR 1 - Moisture & Mold: Causes, Solutions, & Prevention (PART 1)
• DUR 2 - Moisture & Mold: Causes, Solutions, & Prevention (PART 2)
• DUR 3 - Combustion Saftey: Do No Harm
• DUR 4 - The Garage Conneciton Not the Twilight Zone
• DUR 5 - Moisture Management in New Homes
• DUR 6 - Mechanical Ventilation & IAQ
• EFF 6 - Sound Advice for Quiet Homes
• EFF 7 - Crawl Space Techniques
• EFF 8 - Preventing & Solving Wet Attics & Ice Dams
• ELEC 4 - Micro-Cogeneration: Is There a Kilowatt in Your Future?
• ELEC 5 - Lighting: CFLs & Beyond
• ELEC 6 - Reducing Cooling Loads
• ELEC 7 - Humidity Control: Reducing the Loads
• ELEC 8 - Using Smart Technology to Implement Demand Side Management
• ENCL 4 - Sidewall Insulation Tips & Techniques
• ENCL 5 - Beyond R-Value
• ENCL 6 - Superinsulation Details: Retrofits & New Homes
• ENCL 7 - The Many Faces of Spray Foam
• ENCL 8 - Sealing Key Junctures
• FEED 4 - Home Feedback Systems: What's Going on Here?
• FEED 5 - Energy Audit & Rating Tools
• FEED 6 - Get In, Get Out, Get Diagnostics Right
• FEED 7 - Thinking Thermally: Infrared Thermography for Building Diagnostics
• FEED 8 - Moisture Diagnostics
• FIX 1 - Get Down with Basement Conversions
• FIX 3 - Findiing & Fixing Key Junctions: Existing Homes
• FUND 1 - Heat, Air, & Moisture Flow: House as a System
• FUND 1 - Heating System Basics
• FUND 1 - House as a System
• FUND 2 - Building Energy Use Fundamentals
• FUND 2 - Moisture Sources & Transport
• FUND 2 - Zonal Pressure Diagnostics: When, Where, & How
• FUND 3 - Moisture Impacts, Sources & Remedies
• FUND 3 - Prioritizing Energy Savings: What's Important?
• FUND 3 - Dealing with the Job Stoppers
• FUND 4 - The Impact of Moisture on Buildings
• FUND 4 - Combustion Safety Testing
• FUND 5 - Combustion Safety Testing
• FUND 5 - Understanding Building Pressures
• FUND 5 - Venting Combustion Appliances: Recognizing & Ensuring Reliable Performance
• FUND 6 - The Basic Ingredients of Good Indoor Air Quality
• FUND 7 - Mechanical Ventilation: Sorting Out the Options
• FUND 8 - Heating & Cooling: Sorting Out the Options
• GRN 2 - Understanding the Green Programs
• GRN 2 - Green Building: Making Your Way Through the Standards
• GRN 5 - Greener Homes: Achieving Health, Safety, & Durability
• GRN 6 - Residential Photovoltaics: Installation Methods in New & Existing Homes
• HEAL 1 - Green Is Hot, But Is It Healthier?
• HEAL 2 - Wet Basements & Radon: Common Solutions
• HEAL 3 - EPA’s New Lead Rule
• HEAL 4 - IAQ Details from the New EPA Indoor Air Package Guide
• HEAL 5 - Lead Based Paint Issues
• HEAL 6 - Is Green Housing Healthier Housing?
• HEAL 7 - Mold Assessment & Clean-Up Essentials
• HEAL 8 - Can You Name Six Harmful Soil Gases?
• HEAT 4 - Recognizing & Ensuring Reliable Venting Performance
• HEAT 6 - Advanced Heating: Gas & Oil
• HORZ 3 - Details of Superinsulation Retrofits
• HOUS 2 - Enterprise's Affordable Green Communities Initiative
• HVAC 1 - Energy Efficiency, Appliances, & Baseload
• HVAC 1 - Radiant Heating & Cooling
• HVAC 1 - Duct Sealing: What Matters? What Works?
• HVAC 2 - Sizing Heating & Cooling Systems
• HVAC 2 - Ducts: Challenges, Diagnostics, & Solutions
• HVAC 2 - Category 1 Venting (Part 1)
• HVAC 2 - Latest & Greatest in Heating & Cooling
• HVAC 3 - HVAC System Troubleshooting & Diagnostics
• HVAC 3 - Category 1 Venting (Part 2)
• HVAC 4 - HVAC System Installation & Best Practices in New Construction
• HVAC 4 - Sizing Heating Systems
• HVAC 5 - Ducts: Installation & Design
• HVAC 5 - Central Air Conditioning: Principles & Performance
• HVAC 6 - Understanding 80+ & 90+ % Efficient Gas Furnaces
• HVAC 6 - New Technologies in Energy Efficiency (HVAC focus)
• HVAC 7 - Solid Fuel Opportunities & Inspection
• HVAC 8 - HVAC: New & Emerging Technology
• HVAC 9 - New Technology for Oil Systems
• INSP 1 - Cape Cods & 1 1/2 Story Homes: Adding Space During a Remodel
• INSP 2 - Dealing with Cathedral Ceilings & Conditioned Attics
• INSP 3 - Basement Conversions
• IR 4 - Using IR to Diagnose & Sell the Job
• IR 5 - Recognizing Thermal Patterns Related to Insulation, Air Leakage, & Moisture with IR
• LEAR 1 - Diagnostics: What's Gone Wrong & What's Next
• LEAR 2 - Challenging Conventional Wisdom: The Interaction of House Design & Energy Efficiency
• LEAR 3 - Crawl Space Challenges & Solutions
• LEAR 6 - Attached Housing Technical Issues
• LIGHT 4 - Lighting Design Basics
• LIGHT 5 - Lighting: Performance & Applications
• LOOK 1 - The Bionic Audit
• LOOK 2 - Zonal Pressure Diagnostics: When, Where, & How
• LOOK 3 - IR: Recognizing Thermal Patterns
• LOOK 4 - Electric Baseload: A Thousand Tiny Bites
• LOOK 5 - Combustion Safety Testing
• LOW 1 - Party Walls: Opportunities, Differences, & Complications
• LOW 1 - New Evidence on Energy Education Effectiveness
• LOW 2 - Durability Issues in Low Rise Buildings
• LOW 2 - Getting Work Done Beyond Weatherization
• LOW 3 - Reducing Payment Assistance with Energy Efficiency
• LOW 3 - Air Sealing in Low Rise Buildings
• MAM 03 - The Well Plumbed House: Principles (Part 1)
• MAM 04 - Auditing Multifamily Buildings (Part 1
• MAM 05 - Window Treatments: When Replacement is not an Option
• MAM 06N - Pursuing Household Electric Savings (In-field)
• MAM 07 - Practical Solar Thermal: Space & Water Heating
• MAM 08 - Intro to Building Diagnostics: Making the Invisible Visible
• MAM 09 - Mold: Inevitable & Unacceptable
• MAM 09 - Troubleshooting Mold, Moisture, & IAQ Problems
• MAM 10 - Passiv Haus Design & Verification
• MAM 11 - Best Practices: Insulating Attics
• MAM 12N - Intro to Dense Packing Walls (In-field)
• MAM 13 - House Depressurization & Resilient Combustion Venting: Challenges & Solutions (Advanced)
• MAM 14 - Insulating Existing Homes: Best Practices for Walls
• MAM 14N - Using an Infrared Camera (In-field)
• MAM 15 - Sealing Ducts (Hands-on)
• MAM 15 - What Makes Combustion Systems Efficient, & Not [SESSION CANCELLED]
• MAM 16 - Successful Solar Thermal Application: Heating & Hot Water
• MAM 18 - Designing & Installing Mechanical Ventilation Systems
• MAM 19 - Windows: Sorting Through the Options
• MARK 4 - Selling Home Performance by Educating & Offering Options
• MARK 5 - Delivering Customer Driven Solutions Based Sales
• MARK 6 - Turning Calls for Renewables into HP Packages
• MARK 7 - Attracting the Right Customer Without Spending a Bundle
• MARK 8 - Marketing Communications that Work
• MFD 01 - Auditing Existing Homes (Intermediate)
• MFD 02 - LEED for Homes Program Review
• MFD 03 - Designing & Building High Performance Homes: From Habitat to High End
• MFD 06 - Lead Sampling Technician Course [CANCELED]
• MFD HP - National Home Performance with ENERGY STAR® Symposium (Special Session)
• MPM 03 - The Well Plumbed House: Applications (Part 2 Hands-on) (MAM 03 is a pre-requisite)
• MPM 04N - Auditing Multifamily Buildings (Part 2 In-field) (MAM 04 is a pre-requisite)
• MPM 05 - Selecting Windows: Products & Principles
• MPM 06 - Residential Lighting: Principles & Products
• MPM 07 - Siting Renewables
• MPM 08 - The House as a System
• MPM 09 - Practical Applications of the Psychrometric Chart
• MPM 09 - Finding & Fixing Carbon Monoxide Problems
• MPM 10 - Deep Energy Retrofits: Moving Toward Carbon Neutrality
• MPM 11 - Best Practices: Insulating Existing Walls
• MPM 11N - Pressure Balancing a House (in-field)
• MPM 12 - Recruiting, Training, & Retaining Staff & Contractors
• MPM 13N - Pressure Balancing a House (In-field)
• MPM 14N - Air Sealing that Works: Products & Priorities (In-field)
• MPM 15N - Delta Q: Duct Leakage Testing (In-field)
• MPM 18N - Mechanical Ventilation: Verifying Field Performance (in-field)
• MULT 1 - Party Walls in Townhomes & Rowhouses
• MULT 5 - Fire Code Issues in Multifamily
• PART 1 - Party Walls: Issues & Solutions
• PART 2 - 2nd Floor Comfort Issues
• PART 3 - Advanced Framing
• PART 4 - Attached Garages
• PART 5 - Conditioned Vs. Unconditioned Attics
• PART 6 - Basement Conversions
• PART 7 - Knee Wall Issues
• PART 8 - Crawl Space Techniques
• PERF 1 - Densepack: Techniques & Qualify Assurance
• PERF 2 - Townhouses & Small Multifamily
• PERF 3 - Big Ole Houses
• PERF 4 - Ranches, Bungalows, & Other Small Homes
• POL 4 - New Clean Energy Markets
• POL 5 - Green Strings: Tying Energy Efficiency & Solar Together
• POL 6 - Evaluating Peak Impacts of Energy Efficiency
• POL 7 - State Climate Policy Development in the US
• POL 8 - Whole House Retrofits Vs. Technology Rebates
• PRAC 4 - Assessing Impacts: Enterprise Green Communities
• PRAC 5 - Affordable Green: LEED for Homes & Multifamily Retrofit
• PRAC 6 - Affordable Housing: Moving to Zero Energy
• PRAC 7 - Moisture & Infiltration Issues in Modular Homes
• PRAC 8 - Panel: Going Modular with ENERGY STAR®
• PRO 2 - Vented & Unvented Cathedral Ceilings
• PRO 4 - Myths and Realities of Ground Source Heat Pumps
• RES 4 - Crawl Space Research Results
• RES 5 - Reducing Asthma Triggers: Field Research Results
• RES 6 - Exterior Duct Leakage in Northern Homes (Advanced)
• RES 7 - Ten Simple Things That Don't Really Do Much
• RES 8 - ENERGY STAR® Homes Evaluation Results
• RITE 1 - Technical Challenges in New Construction
• RITE 2 - ENERGY STAR® & IAQ
• RITE 3 - Quality HVAC Installations
• RNEW 1 - Solar Thermal: Successful Applications in Heating & Hot Water
• RNEW 2 - Going Geothermal
• SAFE 1 - Venting Combustion Systems: Troubleshooting & Sizing
• SAFE 2 - Introduction to Combustion Safety
• SAFE 3 - Solutions to Backdrafting: Integrated Approaches
• SENS 1 - Codes & Building Science: Conflicts, Resolutions, & Results
• SENS 2 - Defining Energy Audits: Emerging Models
• SENS 3 - Panel: Defining Green
• SHLL 1 - Insulation: Priorities, Practices, & QC
• SHLL 1 - 1 1/2 Story Homes
• SHLL 2 - Insulating & Air Sealing Brick Walls
• SHLL 3 - Reducing Radon: Sub Slab Depressurization
• SHLL 4 - Air Sealing: Priorities, Practices, & QC
• SHLL 4 - 1 1/2 Story Homes (Repeat)
• SHLL 5 - Dealing with Attached Garages
• SHLL 5 - The Garage Connection: Secrets Exposed
• SHLL 6 - Window Upgrades: What's Cost Effective, When?
• SHLL 8 - Insulation: Installation, Performance & Quality
• SUST 4 - Passive House Design: Basics & Metrics
• SUST 5 - Aggressively Efficient: A Holistic Approach to Existing Buildings
• SUST 6 - Building in Nature's Image
• SUST 7 - Real, Relevant, & “Doable” Green Building by Design
• SUST 8 - Climate Responsive Designs for Retrofit
• T -2 BEST - Cathedral Ceilings & Slopes: Insulation, Air Sealing, & Ventilation Code Issues
• T-1 BEST - Mechanical Ventilation for New & Existing Homes
• T-1 HVAC - Hot Water-Based Heating Systems: The Good & the Bad
• T-1 LIAB - Combustion Analysis: Proper Use of Your Test Equipment
• T-1 OPP - Whole House Auditing: Case Studies
• T-1 PROF - Managing Paper & Process to Grow Your Business with NY HPwES
• T-2 HVAC - HVAC: New Technology To Battle Rising Energy Costs
• T-2 LIAB - Stop Mold
• T-2 OPP - Attached Housing Technical Issues
• T-2 SUCC - Getting What You Pay For: Air Sealing, Duct Sealing, & Insulation
• TEVE 1 - Panel - Climate Change & Peak Oil: A New Context for Residential Energy
• TEVE 2 - Role Play: Selling Home Performance Services
• THAM 2 - Finding and Fixing CO in Kitchen Ranges (In field)
• THAM 4 - IR Scanning (REPEAT) (In field)
• THAM 5 - The Garage Connection: Solving Indoor Air Quality & Comfort Problems (In field)
• THER 1 - Quality Control & Getting Buildings Tight
• THER 1 - Understanding Thermal & Pressure Boundaries
• THER 2 - Insulation: Making the Grade
• THER 3 - IR: Recognizing Thermal Patterns Related to Insulation, Air Leakage, & Moisture
• THER 4 - Air Sealing Priorities & Practices
• THER 4 - Strategic Air Sealing with One & Two Part Foam
• THER 5 - Attics: Air Sealing Challenges & Best Practices
• THER 6 - Infrared: Ulitmate Diagnostics, Ultimate Education
• ThPM 01 - Return to Community: Solutions for an Uncertain Energy Future
• ThPM 02 - Modular Housing: Going Green
• ThPM 03 - Achieving Quality in New Construction & Rehab
• ThPM 04 - Central Air Conditioning: Actual Vs. Predicted Performance
• ThPM 05 - Radiant Heating & Cooling: Design & Components
• ThPM 05 - Sound Principles & Solutions for Quiet Homes
• ThPM 06 - Mechanical Ventilation Retrofits for Multifamily Buildings (Advanced)
• ThPM 07 - Using & Interpreting IR (Advanced)
• ThPM 08 - Strategic Air Sealing with One & Two-Part Foam
• ThPM 09N - Getting the Most from Your Duct Blaster (In-field)
• ThPM 09N - Conducting a Moisture Assessment (in-field)
• ThPM 10 - Different Paths to New Low Energy Homes
• ThPM 14 - Insulating Existing Homes: Best Practices for Attics
• ThPM 16 - Designing & Sizing Duct Systems
• VENT 1 - Exhaust Only Ventilation: Doing it Right
• VENT 1 - Tools for the Ventilation Toolbox
• VENT 2 - Ventilating with Forced Air Handlers: Pros & Cons
• VENT 3 - ASHRAE Standard 62.2 Update (Advanced)
• W-1 BEST - Selecting Products for Air Sealing & Insulation
• W-1 HVAC - Practical Duct Modifications
• W-1 OPP - Get the Most From Your Blower Door
• W-1 SOLV - Fixing Wet Basements
• W-2 BEST - Air Sealing: Priorities & Practices
• W-2 HVAC - Central Air Conditioning: Design, Testing, & Installation
• W-2 LIAB - Measuring & Predicting Worst Case Depressurization
• W-2 SOLV - Using & Interpretting Infrared
• W-2 SUCC - Moisture Management for New Homes
• W-3 BEST - Insulation: Installation & Performance
• W-3 HVAC - Duct Design & Sizing
• W-3 SOLV - The Garage Connection
• WAM 1 - IR Scanning (In field)
• WAM 3 - Air Sealing & QC (In field)
• WAM 5 - Finding & Fixing CO in Gas Furnaces (In field)
• WAT 1 - Saving Water: Latest Tools & Techniques
• WAT 2 - Tank Vs. Tankless Water Heaters
• WAT 3 - Making Sense of Water Conservation
• WET 1 - Wet, Moldy Attics & Ice Dams
• WET 1 - Preventing Moisture Failures in Buildings
• WET 2 - Stucco Failures & Solutions
• WET 2 - Practical Applications of the Pschrometric Chart
• WET 3 - Low Cost Moisture Solutions
• WET 3 - Low Cost Moisture Solutions
• WET 4 - Crawl Space Field Research Results: How's It Looking?
• WET 5 - Regional Best Practices: Crawl Space Treatments
• WET 6 - Recognizing & Preventing IAQ & Moisture Problems (Part 1)
• WET 7 - Recognizing & Preventing IAQ & Moisture Problems (Part 2)
• WET 8 - Regional Best Practices: Crawl Space Treatments (Repeat)
• WET 9 - Mold: What Wx Providers Need to Know
• WEVE - Ethics in Weatherization
• WEVE 1 - Energy, Behavior, & Education Forum
• WEVE 2 - Home Performance Analyst Standard Update: BPI & RESNET Collaboration
• WEVE 3 - Panel: Energy Affordability - Not Just a Low Income Problem Anymore
• WHOL 4 - Using Quality Management to Prevent Project Meltdowns
• WHOL 5 - How to Thrive in a "Fee For Service" World
• WHOL 6 - Program Admin Using Web-Based Information Management Tools
• WHOL 7 - Bionic Audit: Productivity Tools & Enhancements
• WHOL 8 - Solving Physical Barriers to Energy Saving Measures
• WORK 1 - Panel: Challenges in Green Collar Workforce Development
• WORK 2 - Panel: Recruiting a Green Collar Workforce
• WORK 3 - Panel: Educating the Green Collar Workforce
• WPM 1 - Duct Triage: Best Practices for Existing Homes (In field)
• WPM 2 - Conducting a Moisture Assessment (In field)
• WPM 4 - Measuring & Predicting Worst-Case Depressurization (In field)